User's Guide
Table Of Contents
- Contents
- About this manual
- 1 Introduction
- The TankRadar Pro System
- Measurement Principle
- 2 Mechanical Installation
- Socket Requirements
- Free Space Requirements
- Dimensions
- Tools
- Mounting the Rod Antenna
- Mounting the Cone Antenna - PTFE sealing
- Mounting the Cone Antenna - Quartz Sealing
- Mounting the Cone Antenna - Process Seal
- Mounting the Parabolic Antenna
- 3 Electrical Installation
- Identication of Installed Options
- Junction Box
- External Connections
- Connecting to a TRL2 Bus Interface
- Connecting HART devices
- Connecting the Display Panel
- Cables
- Safety
- Power Supply
- Grounding
- System Overview
- Internal Connections
- 4 Pro Setup Software
- System Requirements
- Installing the Pro setup software
- Starting the Pro Setup Program
- Setting a Password
- Logging on to a password protected system.
- Setting measurement units
- Installing a Pro Transmitter
- Viewing Level Data
- Service
- 5 Using the Pro Display Panel
- Operation
- Viewing Level Data
- Installing a Pro Transmitter
- Service
- 6 Tank Distances
- Definitions
- Examples
- 7 Technical Information
- Technical Data
- Display Panel
- Analog Outputs
- 8 Troubleshooting
- Display Panel Error Messages
Saab TankRadar
®
Pro Pro Setup
4-25
Edition 2. Ref. No: 306010E
7 Disturbance Echo Handling
Pro Setup offers you powerful tools to handle disturbing echoes.
The False Echo tab displays a list of echoes detected by the Pro
transmitter. To optimize measurement performance you can
register false echoes which are due to disturbing objects in the
tank like beams, agitators and heating coils.
The Spectra-Threshold tab shows the amplitude of the meas-
ured signal along the tank. This diagram is often used to obtain
an overview of the conditions in the tank. You can use this dia-
gram to set a general Amplitude Threshold level in order to
filter out disturbing noise. You can also design an Amplitude
Threshold which is a function of distance from the transmitter
to the tank bottom.