User's Guide
Table Of Contents
- Contents
- About this manual
- 1 Introduction
- The TankRadar Pro System
- Measurement Principle
- 2 Mechanical Installation
- Socket Requirements
- Free Space Requirements
- Dimensions
- Tools
- Mounting the Rod Antenna
- Mounting the Cone Antenna - PTFE sealing
- Mounting the Cone Antenna - Quartz Sealing
- Mounting the Cone Antenna - Process Seal
- Mounting the Parabolic Antenna
- 3 Electrical Installation
- Identication of Installed Options
- Junction Box
- External Connections
- Connecting to a TRL2 Bus Interface
- Connecting HART devices
- Connecting the Display Panel
- Cables
- Safety
- Power Supply
- Grounding
- System Overview
- Internal Connections
- 4 Pro Setup Software
- System Requirements
- Installing the Pro setup software
- Starting the Pro Setup Program
- Setting a Password
- Logging on to a password protected system.
- Setting measurement units
- Installing a Pro Transmitter
- Viewing Level Data
- Service
- 5 Using the Pro Display Panel
- Operation
- Viewing Level Data
- Installing a Pro Transmitter
- Service
- 6 Tank Distances
- Definitions
- Examples
- 7 Technical Information
- Technical Data
- Display Panel
- Analog Outputs
- 8 Troubleshooting
- Display Panel Error Messages
Saab TankRadar
®
ProPro Display Panel
5-10
Edition 2. Ref. No: 306010E
Display Panel Setup
Use this option to set presentation units, language and password.
If you do not want to change the default settings, you can skip
this step and go to Guided or Advanced Setup.
To configure the display panel do the following:
1
. Select the Display Panel option from the Setup Menu and press the
NEXT
button.
2. Select the Units option and press the
NEXT
button. Set the measurement
units to be used for presentation of data and click the
SAVE
button.
3. To change your display panel password select the Password option
and press the
NEXT
button. This password must be entered in order to
be able to change the transmitter configuration. Follow the procedure for
changing to a new password.
4. To set the time scale for trend display (one of the options in the Display
mode) select the Trend Setup option and press the
NEXT
button. Set the
time scale and select the
SAVE
button.
To change language
1.
Select the Display Panel option from the Setup Menu and press the
NEXT
button
2. Select Language and press the
NEXT
button.
3. Move the cursor to the preferred language and press the
MARK
button.
4. Save your choice by pressing the
SAVE
button
Response: the display returns to view mode.