User's Guide
Table Of Contents
- Contents
- About this manual
- 1 Introduction
- The TankRadar Pro System
- Measurement Principle
- 2 Mechanical Installation
- Socket Requirements
- Free Space Requirements
- Dimensions
- Tools
- Mounting the Rod Antenna
- Mounting the Cone Antenna - PTFE sealing
- Mounting the Cone Antenna - Quartz Sealing
- Mounting the Cone Antenna - Process Seal
- Mounting the Parabolic Antenna
- 3 Electrical Installation
- Identication of Installed Options
- Junction Box
- External Connections
- Connecting to a TRL2 Bus Interface
- Connecting HART devices
- Connecting the Display Panel
- Cables
- Safety
- Power Supply
- Grounding
- System Overview
- Internal Connections
- 4 Pro Setup Software
- System Requirements
- Installing the Pro setup software
- Starting the Pro Setup Program
- Setting a Password
- Logging on to a password protected system.
- Setting measurement units
- Installing a Pro Transmitter
- Viewing Level Data
- Service
- 5 Using the Pro Display Panel
- Operation
- Viewing Level Data
- Installing a Pro Transmitter
- Service
- 6 Tank Distances
- Definitions
- Examples
- 7 Technical Information
- Technical Data
- Display Panel
- Analog Outputs
- 8 Troubleshooting
- Display Panel Error Messages
Saab TankRadar
®
ProPro Display Panel
5-16
Edition 2. Ref. No: 306010E
SAVEMARKCNCL
SET ANTENNA TYPE
User defined
Std Cone 4" P
Std Cone 4" Q
HP Cone 4" P
HP Cone 4" Q
Std Cone 6" P
481A70E9705159F2
1 Choose the Start Code option.
2 Confirm your Start Code by selecting
the
SAVE
button.
The transmitter is delivered with a start
code that enables the ordered software
options. If you wish to change the set of
available options, (Saab´s echofixer,
Multiple Echo Tracking™ (MET), Fast
High Accuracy Signal Technique™
(FHAST) and strapping table volume calculation), contact your local
representative for a new start code
3 Check the list of enabled options.
Contact your local representative if you
like to add one or more software op-
tions. If the list is correct confirm by
pressing the
OK
button.
Response: the Start Radar menu is
opened.
4 Choose the Antenna Type option from
the Start Radar menu.
HP=high performance (Hastelloy,
Tantalum, Titanium, Monel),
Std=standard,
P=PTFE tank sealing,
Q=quartz sealing,
C=Ceramic.
Select the type of antenna that is mounted on the gauge and click
the
SAVE
button.
Response: the Start Radar menu is opened.