User's Guide
Table Of Contents
- Contents
- About this manual
- 1 Introduction
- The TankRadar Pro System
- Measurement Principle
- 2 Mechanical Installation
- Socket Requirements
- Free Space Requirements
- Dimensions
- Tools
- Mounting the Rod Antenna
- Mounting the Cone Antenna - PTFE sealing
- Mounting the Cone Antenna - Quartz Sealing
- Mounting the Cone Antenna - Process Seal
- Mounting the Parabolic Antenna
- 3 Electrical Installation
- Identication of Installed Options
- Junction Box
- External Connections
- Connecting to a TRL2 Bus Interface
- Connecting HART devices
- Connecting the Display Panel
- Cables
- Safety
- Power Supply
- Grounding
- System Overview
- Internal Connections
- 4 Pro Setup Software
- System Requirements
- Installing the Pro setup software
- Starting the Pro Setup Program
- Setting a Password
- Logging on to a password protected system.
- Setting measurement units
- Installing a Pro Transmitter
- Viewing Level Data
- Service
- 5 Using the Pro Display Panel
- Operation
- Viewing Level Data
- Installing a Pro Transmitter
- Service
- 6 Tank Distances
- Definitions
- Examples
- 7 Technical Information
- Technical Data
- Display Panel
- Analog Outputs
- 8 Troubleshooting
- Display Panel Error Messages
Saab TankRadar
®
Pro Pro Display Panel
5-17
Edition 2. Ref. No: 306010E
5 Choose the Tank Environment
option.
Select appropriate surface condi-
tions. Mark the options that de-
scribes the conditions in your tank
by using the
MARK
button. You
should not choose more than two
options for best performance. Press
the
SAVE
button to store the current
setting
Response: the display returns to the Start Radar menu.
6 Choose the Pipe Diameter option if
you are using a Still Pipe antenna.
Enter the still pipe diameter by using
the
and buttons.
Note that the default value is -0.1
(negative). This means that no pipe
correction is done.
Press the
SAVE
button to store the
entered value.
Response: the Start Radar menu is opened.
7. Press the
BACK
button to return to
the Advanced Setup menu.
The Special option allows you to
make advanced setup of Tank
Environment database registers. For
trained personnel only.