User's Guide

ManualsBrandsRosemount Tank Radar ManualsElectronicsRadar Level Gauge

100

Table Of Contents

Contents

Saab TankRadar

ProPro Display Panel

5-22

Edition 2. Ref. No: 306010E

EDITCNCL

TANK ECHOES

Surface 10.543 m

Echo 1 -0.213 m

Echo 2 1.629 m

Echo 3 7.867 m

Echo 4 20.620 m

Echo 5 21.001 m

Tank Echoes

Reg. False Echoes

FALSE ECHO

BACK

8. Select the False Echo option from the Advanced Setup menu (optional).

In normal operation the gauge compares

detected echoes with a list of registered

disturbance echoes, in order to decide wich

one is the actual product surface.

To view a list of echoes that the gauge has

detected select the Tank Echoes option.

5 Repeat steps 1 to 4 if you wish to register more disturbing echoes.

The Set as surface option allows you to define an echo as the

product surface.

Mark the Add new false option if you want to manually add echoes.

This may be a useful option if, for example, there are known distur-

bances below the product surface which can not be detected by the

gauge at the time of installation.

6 Click the

CNCL

button to return to the False Echo menu.

To view the current list of registered disturbing echoes select the Reg. False

Echoes option:

You can select echoes from this list and

add to the list of registered echoes. You

should only register disturbing echoes

which can be identified as caused by an

object in the tank. See chapter 5

Pro Setup

Software

for further information on when to

To register a disturbing echo, do the

following:

1 Move the cursor to the echo you want

to add to the list.

2 Click the

EDIT

button.

3 Move the cursor to Add to list, and

click the

MARK

button.

4 Click the

SAVE

button to register the

marked echo.