User's Manual

5
Reference Manual
00809-0300-4248, Rev AA
Section 1: Introduction
July 2014
Introduction
Temperature limits
1.4 Service support
To expedite the return process outside of the United States, contact the nearest Emerson
Process Management representative.
Within the United States, call the Emerson Process Management Instrument and Valves
Response Center using the 1-800-654-RSMT (7768) toll-free number. This center, available 24
hours a day, will assist you with any needed information or materials.
The center will ask for the following information:
 Product model
 Serial numbers
 The last process material to which the product was exposed
The center will provide:
 A Return Material Authorization (RMA) number
 Instructions and procedures that are necessary to return goods that were exposed to
hazardous substances
Note
If the device has been exposed to a hazardous substance, a Material Safety Data Sheet (MSDS)
must be included with the returned materials. An MSDS is required by law to be available to
people exposed to specific hazardous substances.
Operating limit Storage limit
–40 to 185 °F –40 to 185 °F
–40 to 85 °C –40 to 85 °C
Individuals who handle products exposed to a hazardous substance can avoid injury if they
are informed of and understand the hazard. If the product being returned was exposed to a
hazardous substance as defined by OSHA, a copy of the required Material Safety Data Sheet
(MSDS) for each hazardous substance identified must be included with the returned goods.