User's Manual

16
Reference Manual
00809-0300-4248, Rev AA
Section 2: Configuration
July 2014
Configuration
Figure 2-6. Field Communicator Menu Tree: Configure
Home
1. Overview
2. Configure
3. Service Tools
Configure
1. Guided Setup
2. Manual Setup
3. Alert Setup
Guided Setup
1. Join to Network
2. Configure Update Rate
(2. Configure Adv Brdcsg)
3. Configure Sensor
4. Configure Process Alarm
5. Configure Device Display
6. Calibrate Sensor
Manual Setup
1.Wireless
2. Sensor
3. Percent of Range
4. Display
5. HART
6. Device Temperature
7. Terminal Temperature
8. Device Information
9. Power
10. Security
Alert Setup
1. Hi-Hi Alarm
2. Hi Alarm
3. Lo Alarm
4. Lo-Lo Alarm
Wireless
1. Network ID
2. Join to Network
3. Broadcast Info
Sensor
1. Sensor Value
2. Sensor Status
3. Type
4. Connection
5. Units
6. Serial Number
7. RTD 2 Wire Offset
8. Maximum
9. Minimum
Percent of Range
1. % of Range
2. % of Range Status
3. Upper Range Value
4. Lower Range Value
5. Primary Variable
6. Maximum
7. Minimum
Display
1. Display Mode
2. Display Items
HART
1. Meas Status Log
2. Configure Data Hist
Terminal Temperature
1. Terminal Temp
2. Terminal Temp Status
3. Units
4. Maximum
5. Minimum
Device Information
1. Tag
2. Long Tag
3. Descriptor
4. Message
5. Date
6. Country
7. SI Unit Control
Power
1. Power Mode
2. Power Source
3. AC Power Filter
Security
1. Write Protect
2. Lock Status
3. Lock/Unlock
4.Over the Air Upgrade
Device Temperature
1. Electronics Temp
2. Elect Temp Status
3. Units
4. Maximum
5. Minimum
Display Items
1. Sensor
2. Percent of Range
3. Terminal Temperature
4. Electronics Temperature
5. Supply Voltage