Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 Wireless Acoustic Transmitter www.rosemount.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 Rosemount 708 Wireless Acoustic Transmitter Rosemount 708 Hardware Revision HART® Device Revision Field Communicator Field Device Revision 1 1 Dev vX, DD vX NOTICE Read this manual before working with the product. For personal and system safety, and for optimum product performance, make sure to thoroughly understand the contents before installing, using, or maintaining this product.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 Explosions could result in death or serious injury: Installation of this transmitter in an explosive environment must be in accordance with the appropriate local, national, and international standards, codes, and practices. Please review the approvals section of the 708 Reference Manual for any restrictions associated with a safe installation.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 Table of Contents SECTION 1 Overview Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Service Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference Manual Rosemount 708 TOC-2 00809-0100-4708, Rev AA June 2010
Reference Manual 00809-0100-4708, Rev AA June 2010 Section 1 Rosemount 708 Overview Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-2 Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-3 Service Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-4 Product Recycling/Disposal . . . . . . . . . . . . . .
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 OVERVIEW Manual This manual is designed to assist in the installation, operation, and maintenance of the Rosemount 702.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 CONSIDERATIONS General The acoustic transmitter detects either a noise or no noise along with a temperature. By using simple HART configuration, the Rosemount 708 converts the noise and temperature status to a device status. Wireless Considerations Power Up Sequence The power module should not be installed on any wireless device until the Smart Wireless Gateway (“Gateway”) is installed and functioning properly.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 Electrical Power Module The Rosemount 708 Wireless transmitter is self-powered. The included power module contains one “D” size primary lithium/thionyl chloride battery. Each battery contains approximately X.X grams of lithium. Under normal conditions, the battery materials are self-contained and are not reactive as long as the batteries and the power module are maintained.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 covered by IATA (International Air Transport Association), ICAO (International Civil Aviation Organization), and ARD (European Ground Transportation of Dangerous Goods). It is the responsibility of the shipper to ensure compliance with these or any other local requirements. Consult current regulations and requirements before shipping.
Reference Manual Rosemount 708 1-6 00809-0100-4708, Rev AA June 2010
Reference Manual Rosemount 708 1-7 00809-0100-4708, Rev AA June 2010
Reference Manual Rosemount 708 1-8 00809-0100-4708, Rev AA June 2010
Reference Manual 00809-0100-4708, Rev AA June 2010 Section 2 Rosemount 708 Configuration Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-1 Device Sensor Configuration . . . . . . . . . . . . . . . . . . . . . . page 2-1 Device Network Configuration . . . . . . . . . . . . . . . . . . . . . page 2-2 Remove Power Module . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference Manual Rosemount 708 DEVICE NETWORK CONFIGURATION 00809-0100-4708, Rev AA June 2010 To communicate with the Gateway, and ultimately the Information System, the transmitter must be configured to communicate with the wireless network. Using a Field Communicator or AMS, enter the Network ID and Join Key so they match the Network ID and Join Key of the Gateway and the other devices in the network.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 Figure 2-2. 475 Field Communicator Connections For HART communication, a 708 DD is required.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 HART Menu Tree For ease of operation, changing setup, such as switch type, can be completed in several locations. Figure 2-3. Field Communicator Menu Tree 1. 2. 3. 4. 5. Active Alerts Communication Status Sensor Sensor Status Last Update Time 1. 2. 3. 4. 5. 1. 2. 3. 4.
Reference Manual 00809-0100-4708, Rev AA June 2010 Fast Key Sequence Rosemount 708 Table 2-1 lists the fast key sequence for common transmitter functions. NOTE: The fast key sequences assume that DD Dev v1, DD v4 is being used. Table 2-1.
Reference Manual Rosemount 708 2-6 00809-0100-4708, Rev AA June 2010
Reference Manual 00809-0100-4708, Rev AA June 2010 Section 3 Rosemount 708 Mounting Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-1 Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-2 Direct Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3-2 Ground the Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 MOUNTING The acoustic transmitter is connected directly to the piping that is being measured. Direct Mount 1. Align the metal foot of the transmitter onto the pipe. 2. Secure the transmitter with the two provided clamps. One should be on each side of the foot. 3. If commissioning the device, install the power module.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 3-3
Reference Manual Rosemount 708 3-4 00809-0100-4708, Rev AA June 2010
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 3-5
Reference Manual Rosemount 708 3-6 00809-0100-4708, Rev AA June 2010
Reference Manual 00809-0100-4708, Rev AA June 2010 Section 4 Rosemount 708 Commissioning Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-1 Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-1 Verify Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4-2 AMS Wireless Configurator . . . . . . . . . . . . . . . . . . . . . . . .
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 VERIFY OPERATION Operation can be verified in three locations: at the device, by using the 475 Field Communicator, at the Smart Wireless Gateway’s integrated web interface or via AMS Wireless Configurator. Troubleshooting If the device is not joined to the network after power up, verify the correct configuration of the Network ID and Join Key, and verify that Active Advertising has been enabled on the Gateway.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 Figure 4-1. Smart Wireless Gateway Network Settings AMS Wireless Configurator When the device has joined the network, it will appear in the Device Manager as illustrated below. Troubleshooting If the device is not joined to the network after power up, verify the correct configuration of the Network ID and Join Key, and verify that Active Advertising has been enabled on the Gateway.
Reference Manual Rosemount 708 4-4 00809-0100-4708, Rev AA June 2010
Reference Manual 00809-0100-4708, Rev AA June 2010 Section 5 Rosemount 708 Operation and Maintenance Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5-1 Power Module Replacement . . . . . . . . . . . . . . . . . . . . . . . page 5-1 SAFETY MESSAGES Instructions and procedures in this section may require special precautions to ensure the safety of the personnel performing the operations.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 Environmental Considerations As with any battery, local environmental rules and regulations should be consulted for proper management of spent batteries. If no specific requirements exist, recycling through a qualified recycler is encouraged. Consult the materials safety data sheet for battery specific information. Shipping Considerations The unit was shipped to you without the power module installed.
Reference Manual 00809-0100-4708, Rev AA June 2010 Appendix A Rosemount 708 Specifications and Reference Data Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page A-1 Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . page A-3 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page A-4 SPECIFICATIONS Functional Specifications Output WirelessHART™ acoustic, temperature states.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 Wave Guide • Machined 316L SST Mounting Transmitters are directly attached to piping using two hose clamps. Weight 708 with power module 20 ounces 708 without power module 15 ounces Enclosure ratings (702) Housing option code P is NEMA 4X, and IP65.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 DIMENSIONAL DRAWINGS 708 Direct Mount Dimensions are in inches (millimeters) A-3
Reference Manual Rosemount 708 00809-0100-4708, Rev AA June 2010 ORDERING INFORMATION Table A-1. Rosemount 708 Acoustic Transmitter Ordering Information ★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery. __The Expanded offering is subject to additional delivery lead time.
Reference Manual 00809-0100-4708, Rev AA June 2010 Appendix B Rosemount 708 Product Certifications Approved Manufacturing Locations . . . . . . . . . . . . . . . . . page B-1 Telecommunication Compliance . . . . . . . . . . . . . . . . . . . . page B-1 FCC and IC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page B-1 European Union Directive Information . . . . . . . . . . . . . . . page B-1 Ordinary Location Certification for FM . . . . . . . . . . . . . . .
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 Hazardous Locations Certificates North American Certifications Factory Mutual (FM) Approvals I5 FM Intrinsic Safety Intrinsically Safe for Class I, Division 1, Groups A, B, C, D Zone Marking: Class I, Zone 0, AEx ia llC Temperature Codes T4 (Tamb = -50 to 70° C) Ambient temperature limits: -50 to 85° C Intrinsically Safe when installed in accordance with Rosemount drawing XXXXX-XXXX.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 IECEx Certifications I7 IECEx Intrinsic Safety Certificate No.: IECExBAS XX.XXXXX Ex ia IIC T4 (Tamb = -60 °C to 70 °C) IP65 For use with Rosemount Power Module P/N XXX-XXXX-XXXX only Does not meet the surface resistivity requirements, and it must only be cleaned with a damp cloth to avoid electrostatic charging TABLE 1.
Reference Manual Rosemount 708 Figure B-1.
Reference Manual 00809-0100-4708, Rev AA June 2010 Rosemount 708 Figure B-2.
Reference Manual Rosemount 708 B-6 00809-0100-4708, Rev AA June 2010
Reference Manual 00809-0100-4708, Rev AA June 2010 The Emerson logo is a trade mark and service mark of Emerson Electric Co. Rosemount and the Rosemount logotype are registered trademarks of Rosemount Inc. PlantWeb is a registered trademark of one of the Emerson Process Management group of companies. HART is a registered trademark of the HART Communication Foundation. Lexan and Noryl are registered trademark of General Electric. All other marks are the property of their respective owners.
