User's Manual

Reference Manual
00809-0100-4708, Rev AA
June 2010
4-3
Rosemount 708
Figure 4-1. Smart Wireless
Gateway Network Settings
AMS Wireless
Configurator
When the device has joined the network, it will appear in the Device Manager
as illustrated below.
Troubleshooting
If the device is not joined to the network after power up, verify the correct
configuration of the Network ID and Join Key, and verify that Active
Advertising has been enabled on the Gateway. The Network ID and Join Key
in the device must match the Network ID and Join Key of the Gateway.
The Network ID and Join Key may be obtained from the Gateway on the
Setup>Network>Settings page on the web interface (see Figure 4-1 on
page 4-3). The Network ID and Join Key may be changed in the wireless
device by using the following Fast Key sequence.
Function Key Sequence Menu Items
Wireless 2,1,1 Join Device to Network