User's Manual
Table Of Contents
- 2051_Wireless_revAA_6-7
- Rosemount 2051 Wireless Series
- Contents
- Section 1: Introduction
- Section 2: Configuration
- 2.2.1 Warnings () 6
- 2.3.1 Connection Diagrams 6
- 2.4.1 Join Device to Network 7
- 2.4.2 Configure Update Rate 8
- 2.4.3 Remove Power Module 8
- 2.5.1 Review Pressure Information 9
- 2.5.2 Review Device Information 9
- 2.5.3 Review Sensor Information 11
- 2.5.4 Review Radio Information 11
- 2.7.1 Operating Parameters 14
- 2.8.1 Set Process Variable Unit 14
- 2.8.2 Set Transfer Function 16
- 2.8.3 Damping 17
- 2.8.4 Write Protect 17
- 2.9.1 LCD Display Configuration 18
- 2.10.1 Configure Process Alarms 19
- 2.10.2 Sensor Temperature Unit 20
- 2.11.1 Master Reset 20
- 2.11.2 Join Status 20
- 2.11.3 Number of Available Neighbors 21
- 2.12.1 Saving, Recalling, and Cloning Configuration Data 22
- Section 3: Installation
- 3.2.1 Warnings () 26
- 3.3.1 General 27
- 3.3.2 Wireless 27
- 3.3.3 Mechanical 27
- 3.3.4 Environmental 28
- 3.4.1 Mount the Transmitter 29
- 3.4.2 Process Connections 32
- 3.4.3 Consider Housing Rotation 34
- 3.4.4 Grounding 34
- 3.4.5 Power Module Installation 35
- 3.4.6 Installing the LCD Display 35
- 3.5.1 Rosemount 305 Integral Manifold Installation Procedure 37
- 3.5.2 Rosemount 306 Integral Manifold Installation Procedure 37
- 3.5.3 Rosemount 304 Conventional Manifold Installation Procedure 38
- 3.5.4 Manifold Operation 38
- Section 4: Commissioning
- Section 5: Operation and Maintenance
- 5.2.1 Sensor Trim overview 48
- 5.2.2 Zero Trim 49
- 5.2.3 Sensor Trim 49
- 5.2.4 Recall Factory Trim—Sensor Trim 50
- 5.2.5 Line Pressure Effect (Range 2 and Range 3) 50
- 5.2.6 Compensating for Line Pressure (Range 4 and Range 5) 50
- 5.3.1 Startup Screen Sequence 53
- 5.3.2 Diagnostic button screen sequence 55
- 5.3.3 Network diagnostic status screens 56
- 5.3.4 Device Diagnostic Screens 59
- Section 6: Troubleshooting
- 6.2.1 Warnings () 63
- 6.3.1 Remove from Service 67
- 6.3.2 Remove Feature Assembly 68
- 6.4.1 Reassemble the Process Flange 69
- A.3.1 Range and Sensor Limits 75
- A.6.1 Options (Include with selected model number) 86
- A.6.2 Options (Include with selected model number) 93
- A.6.3 Options (Include with selected model number) 98
- A.6.4 Options (Include with selected model number) 105
- A.6.5 Options (Include with selected model number) 110
- A.6.6 Options (Include with selected model number) 115
- B.1.1 Approved manufacturing locations 119
- B.1.2 European directive information 119
- B.1.3 Telecommunication compliance 119
- B.1.4 FCC and IC 119
- B.1.5 Ordinary location certification for FM 119
- B.1.6 North American certifications 120
- B.1.7 CSA - Canadian Standards Association 120
- B.1.8 European certifications 120
- B.1.9 Japanese Certifications 121
- B.1.10 China (NEPSI) Certifications 121
- Section 1 Introduction
- Section 2 Configuration
- Section 3 Installation
- Section 6 Troubleshooting
- Appendix A Specifications and Reference Data
- Appendix B Product Certifications
- 3051_Wireless_revAA_6-7
- Rosemount 3051 Wireless Series
- Contents
- Section 1: Introduction
- 1.2.1 Rosemount 3051CD Differential Pressure Transmitter 1
- 1.2.2 Rosemount 3051CG Gage Pressure Transmitter 1
- 1.2.3 Rosemount 3051CA Absolute Pressure Transmitter 1
- 1.2.4 Rosemount 3051T Gage and Absolute Pressure Transmitter 2
- 1.2.5 Rosemount 3051L Liquid Level Transmitter 2
- 1.5.1 Wireless considerations 5
- 1.5.2 Mechanical 6
- 1.5.3 Electrical 6
- 1.5.4 Environmental 6
- Section 2: Configuration
- 2.2.1 Warnings () 10
- 2.3.1 Connection Diagrams 10
- 2.4.1 Join Device to Network 11
- 2.4.2 Configure Update Rate 12
- 2.4.3 Remove Power Module 12
- 2.5.1 Review Pressure Information 13
- 2.5.2 Review Device Information 13
- 2.5.3 Review Sensor Information 15
- 2.5.4 Review Radio Information 15
- 2.7.1 Operating Parameters 17
- 2.8.1 Set Process Variable Unit 17
- 2.8.2 Set Transfer Function 19
- 2.8.3 Damping 20
- 2.8.4 Write Protect 20
- 2.9.1 LCD Display Configuration 21
- 2.10.1 Configure Process Alarms 22
- 2.10.2 Sensor Temperature Unit 23
- 2.11.1 Master Reset 23
- 2.11.2 Join Status 23
- 2.11.3 Number of Available Neighbors 24
- 2.12.1 Saving, Recalling, and Cloning Configuration Data 25
- Section 3: Installation
- 3.2.1 Warnings () 28
- 3.3.1 General 29
- 3.3.2 Wireless 29
- 3.3.3 Mechanical 29
- 3.3.4 Environmental 30
- 3.4.1 Mount the Transmitter 31
- 3.4.2 Process Connections 34
- 3.4.3 Consider Housing Rotation 36
- 3.4.4 Grounding 36
- 3.4.5 Power Module Installation 37
- 3.4.6 Installing the LCD Display 37
- 3.5.1 Rosemount 305 Integral Manifold Installation Procedure 39
- 3.5.2 Rosemount 306 Integral Manifold Installation Procedure 39
- 3.5.3 Rosemount 304 Conventional Manifold Installation Procedure 40
- 3.5.4 Manifold Operation 40
- Section 4: Commissioning
- Section 5: Operation and Maintenance
- 5.2.1 Sensor Trim Overview 52
- 5.2.2 Zero Trim 53
- 5.2.3 Sensor Trim 53
- 5.2.4 Recall Factory Trim—Sensor Trim 54
- 5.2.5 Line Pressure Effect (Range 2 and Range 3) 54
- 5.2.6 Compensating for Line Pressure (Range 4 and Range 5) 54
- 5.3.1 Startup Screen Sequence 57
- 5.3.2 Diagnostic Button Screen Sequence 59
- 5.3.3 Network Diagnostic Status Screens 60
- 5.3.4 Device Diagnostic Screens 63
- Section 6: Troubleshooting
- 6.2.1 Warnings () 68
- 6.3.1 Removing from Service 72
- 6.3.2 Removing the electronics board 73
- 6.3.3 Removing the sensor from the housing 74
- 6.5.1 Attaching electronics board 75
- 6.5.2 Reassembling the 3051C process flange 75
- 6.5.3 Installing drain/vent valve 77
- A.1.1 Conformance to specification (±3s (Sigma)) 79
- A.1.2 Digital Output 79
- A.1.3 Reference Accuracy 80
- A.1.4 Flow performance - flow reference accuracy 80
- A.1.5 Total Performance 81
- A.1.6 Long Term Stability 82
- A.1.7 Dynamic Performance 82
- A.1.8 Line Pressure Effect per 1000 psi (6,9 MPa) 82
- A.1.9 Ambient Temperature Effect per 50°F (28°C) 83
- A.1.10 Mounting Position Effects 83
- A.1.11 Vibration Effect 83
- A.1.12 Power Supply Effect 83
- A.1.13 Electromagnetic Compatibility (EMC) 83
- A.2.1 Service 84
- A.2.2 Range and Sensor Limits 85
- A.2.3 Zero and Span Adjustment Requirements 85
- A.3.1 Overpressure Limits 86
- A.3.2 Static Pressure Limit 87
- A.3.3 Burst Pressure Limits 87
- A.3.4 Temperature limits 87
- A.3.5 Humidity Limits 88
- A.3.6 Volumetric Displacement 88
- A.3.7 Damping 88
- A.4.1 Process Connections 89
- A.4.2 Process-Wetted Parts 89
- A.4.3 Rosemount 3051L process wetted parts 90
- A.4.4 Non-Wetted Parts 90
- A.4.5 Shipping Weights for 3051 Wireless Pressure Transmitter 91
- A.5.1 Ordering Information 95
- A.5.2 Rosemount 3051C Coplanar Pressure Transmitter 95
- A.5.3 Rosemount 3051T In-Line Pressure Transmitter 101
- A.5.4 Rosemount 3051CF Flowmeter Series 105
- A.5.5 Rosemount 3051L Level Transmitter 121
- B.1.1 Approved manufacturing locations 143
- B.1.2 European directive information 143
- B.1.3 Telecommunication compliance 143
- B.1.4 FCC and IC 143
- B.1.5 Ordinary location certification for FM 143
- B.1.6 North American certifications 144
- B.1.7 CSA - Canadian Standards Association 144
- B.1.8 European certifications 144
- B.1.9 Japanese Certifications 145
- B.1.10 China (NEPSI) Certifications 145
- Section 1 Introduction
- Section 2 Configuration
- Section 3 Installation
- Section 4 Commissioning
- Section 5 Operation and Maintenance
- Section 6 Troubleshooting
- Appendix B Product Certifications
- Section 1: Introduction
113
Reference Manual
00809-0100-4100, Rev AA
Appendix A: Specifications and Reference Data
June 2012
Specifications and Reference Data
3 Direct-mount, Integral 3-valve Manifold ★
7 Remote-mount,
1
/4-in. NPT Connections ★
Differential Pressure Range
Standard Standard
1 0 to 25 in H
2
O (0 to 62,3 mbar) ★
2 0 to 250 in H
2
O (0 to 623 mbar) ★
3 0 to 1000 in H
2
O (0 to 2,5 bar) ★
Transmitter Output
Standard Standard
X Wireless ★
Transmitter Housing Material Conduit Entry Size
Standard Standard
P Engineered polymer No conduit entries ★
Transmitter Performance Class
Standard Standard
1 Up to ±1.75% flow rate accuracy, 8:1 flow turndown, 5-year stability ★
Wireless options (Requires option code X and Engineered Polymer housing code P)
Wireless Transmit Rate, Operating Frequency and Protocol
Standard
WA3 User Configurable Transmit Rate, 2.4GHz WirelessHART
PlantWeb Diagnostic Functionality
Standard
WP5 Internal Antenna, Compatible with Green Power Module (I.S. Power Module Sold Separately)
Options (Include with selected model number)
Installation Accessories
Standard Standard
AB ANSI Alignment Ring (150#) (Only required for 10-in. (250 mm) and 12-in. (300mm) line sizes) ★
AC ANSI Alignment Ring (300#) (Only required for 10-in. (250 mm) and 12-in. (300mm) line sizes) ★
AD ANSI Alignment Ring (600#) (Only required for 10-in. (250 mm) and 12-in. (300mm) line sizes) ★
DG DIN Alignment Ring (PN16) ★
DH DIN Alignment Ring (PN40) ★
DJ DIN Alignment Ring (PN100) ★
Expanded
JB JIS Alignment Ring (10K)
JR JIS Alignment Ring (20K)
JS JIS Alignment Ring (40K)
Remote Adapters
Standard Standard
FE Flange Adapters 316 SST (1/2-in NPT) ★
High Temperature Application
Expanded
HT Graphite Valve Packing (Tmax = 850 °F)
Flow Calibration
Expanded
WC
(3)
Flow Calibration Certification (3 point)
WD
(3)
Discharge Coefficient Verification (full 10 point)
Pressure Testing
Table 4. Rosemount 3051CFC Compact Flowmeter Ordering Information
★ The Standard offering represents the most common options. The starred options (★) should be selected for best delivery.
__The Expanded offering is subject to additional delivery lead time.