Specifications

Rosen Aviation Digital Wireless Headphone System
Document Number: 103517
Revision: A
Date: 11/23/09
Template: 4.2.3-6-FM; Revision A; 16 May, 2005
Page 6 of 10
4. PLACING THE TRANSMITTER
The wall-mounted transmitter must be mounted with the J1 connector pointing toward the ceiling
of the aircraft cabin. It can be placed behind a bulkhead or other wall, as long as the bulkhead or
wall is made of composite or wood material.
Figure 1 Digital wireless headphone transmitter
For acceptable performance, the transmitter is to be mounted so that the antenna is aligned along
the aircraft longitudinal axis. The optimal installation is with the transmitter in the front of
passenger seating pointing aft.
Install transmitter so that
J1 connector points
toward aircraft ceiling
This is the antenna face. For best results,
the transmitter will be wall-mounted in
front of passenger seating with the
antenna facing aft.