ROSEN Rosen Entertainment Systems 1120 California Avenue Corona CA 92881 UN7000 7” Universal Headrest Monitor (909) 898-9808 www.rosenentertainment.
Installation Flush Mounting The kit includes a protective trim ring and an optional spacer ring for use when the mounting surface is uneven. Table of Contents 1. Select appropriate locations in your vehicle for the monitor and for the power supply module. 2. Be sure there is sufficient depth for the trim ring. Add the spacer ring for shallow locations with uneven curved surfaces such as upholstery. Be sure there is enough space for both the trim ring and for any excess interconnect cable. 3.
Introduction and System Overview Introduction and System Overview Congratulations on your purchase of a Rosen Widescreen Universal Monitor! This widescreen flat panel LCD monitor features advanced display technology and versatile installation options. 16:9 aspect ratio. Sometimes called “widescreen,” this is the same aspect ratio used by next generation digital televisions. • 7" screen (measured diagonally). • Adjustable backlight to compensate for ambient lighting conditions.
Installation Electrical Installation Begin installation of the Widescreen Universal Monitor by installing the power supply module and routing cables, as shown. Operating Guide Operating Guide Remote Control The remote control includes the following buttons for use with this monitor: Monitor Menu, Mode, Up, Down, and Power. Other buttons on the remote do not control the monitor.
Operating Guide Front Panel Controls The front panel controls are located on the lower edge of the monitor. IR Remote Receiver Down Menu Up Installation The Widescreen Universal Monitor includes mounting options described in the following sections. Before you install the monitor, consider the following important notices: • NEVER install this monitor where it can be viewed from the driving position; this is a violation of many state and local vehicle codes.
Operating Guide Reset All Settings The Reset menu option enables you to restore all settings to their original factory values. Operating Guide Turning On and Off the Monitor To turn on the monitor: • To reset all settings: 1. Press Menu on the monitor or Monitor Menu on the remote control. The OSD menu appears. 2. Press Menu on the monitor or Monitor Menu on the remote control until the arrow points to “Reset.” 3. Press or to return all settings to factory defaults. 4.
Operating Guide Operating Guide Dimming the Backlight The Widescreen Universal Monitor features an adjustable backlight that dims or brightens the monitor to enhance viewing in varying lighting conditions. MODE MENU To adjust the backlight: COLOR 32 1. Press the Menu button on the monitor or Monitor Menu on the remote control. The OSD menu appears. COLOR BRIGHT TINT DIMMER FORMAT RESET 4. Press Menu on the monitor or Monitor Menu on the remote control again to exit the menu.
