Notes
Notes Table of Contents Quick Reference .................................................................. 3 Powering on the system Watching a DVD Listening Over Vehicle Speakers Using Other Video Sources Watching TV About the ClearVue 6821 DVD System ............................... 4 Operating the System .......................................................... 5 Precautions .................................................................... 5 Switching On ...............................................
Important Safety Notices Quick Reference To power on the system: DANGER AN IMPROPERLY LOCATED OR INSTALLED MONITOR CAN CAUSE DEATH OR SERIOUS BODILY INJURY 1 Turn ignition switch to Run or ACC. 2 Press the release button as shown. READ THE FOLLOWING INFORMATION THOROUGHLY BEFORE INSTALLATION 3 Screen will power on automatically. To watch a DVD: 1 Power on the system. 2 Point the remote at the screen and press the POWER button to turn on the DVD player.
About the ClearVue 6821 DVD System Frequently Asked Questions Frequently Asked Questions About the ClearVue 6821 DVD System Why don’t I hear ClearVue sound over my radio? Welcome to the ClearVue 6821 DVD System Owner’s Manual. The ClearVue 6821 DVD system includes the following components: Try both 89.1 FM and 88.7 FM on your radio dial, and make sure that the FM Modulator is on by pressing and releasing the “SPEAKER ON/OFF” button on the remote until “FM ON” is displayed on the screen.
Operating the System Using Auxiliary Sources Operating the System Using Auxiliary Sources Precautions • Use this system only after proper installation by a qualified installer. • If the internal temperature of the vehicle is extremely high, allow a short cooling down period before operating the unit. The system includes RCA inputs on the front of the DVD player that enable you to attach an external source device such as a video game or camcorder.
Advanced Functions Operating the System Language Support Options What You Can Play Some DVDs offer a variety of language options for DVD audio, DVD menu text, and DVD subtitles. Features vary depending on the DVD you are viewing. This unit is designed for use with DVD, VCD, CD, CD-R, and CDRW with MP3 or MPEG-1 file recordings. Functions will vary depending on the features available on the disc you are playing.
Operating the System Advanced Functions • “Chapter remain”—Chapter remaining time. Using the Headphones To display status information for audio CDs: IR Transmitter Dome Press the DISP button repeatedly to cycle through the following information: • “Single elapsed”—Track time. • “Single remain”—Track remaining time. Using the headphones with your system allows rear-seat passengers to listen to their DVD or video game without disturbing front-seat passengers.
Operating the System Advanced Functions DVD Menus Most DVD discs have unique menu structures. DVD menu contents and operation may differ from disc to disc. the batteries, remove the battery compartment cap on the right earpiece and insert batteries, as shown. To use DVD menus: 1 During DVD playback, press the MENU button. The DVD menu available on the disc appears on the screen. 2 Use the up, down, left and right arrows to select the preferred menu option.
Operating the System Advanced Functions To access the parental control rating system: Using the TV Tuner To view television on the system: 1 Press the SETUP button. The Setup menu appears. 1 Press MODE on the remote control until “TV 2 Use the up and down arrows to highlight “Parental Control” and press PLAY/PAUSE twice to confirm your selection. Mode” appears on the screen. 3 Use the up and down arrows to highlight “Parental”.
Advanced Functions Remote Control Reference • “Pic mode”— “Auto”: Automatically adjusts screen. Remote Control Reference The ClearVue system remote control includes the following features. Only the buttons labeled below are active. “Hi-resolution”: Enhances screen image. “N-flicker”: Prevents screen trembling. • “Angle mark”—When playing DVDs that can be viewed from different angles, a camera icon appears on the upper part of the screen. • “Captions”—Turns on or off subtitles.
Advanced Functions Remote Control Reference Remote Control Battery Replacement Advanced Functions The ClearVue system remote requires two AAA batteries. Replace the batteries as shown below. Customize Settings Use the Setup menu to personalize operation of your DVD player. Setup includes options for various Language, Display, Audio, and Parental Control features. The features are described below. 1 Press the SETUP button. The Setup menu appears.
Basic Functions Basic Functions Changing View Settings Basic Functions To adjust settings for color, contrast, brightness, or tint: Inserting or Ejecting Discs 1 Press VIDEO MENU on the remote. The following menu appears in the screen. Press the EJECT button to insert or eject a disc. ***MENU*** COLOR (32) CONTRAST (32) BRIGHT (32) TINT (32) Playback To play a disc: 1 Press the EJECT button to open the DVD player. 2 Load the disc with the label side up. 3 Press EJECT again.
Basic Functions Basic Functions • Press the PREVIOUS TRK button during playback to skip Mute 1 Press the MUTE button once to mute the sound. “Mute” appears on the monitor. 2 Press MUTE again to restore sound. Fast Forward and Reverse Searching 1 Press the FAST button during playback to fast forward. “FF 2x” appears on the monitor. backward to the previous track or to the previous title/chapter.
