CARS HOW VW Series Installation Manual NOTICE OF INTENDED INSTALLATION AND USE THE CAR SHOW MULTI-MEDIA NAVIGATION SYSTEMS CONTAIN AN INTERNAL VIDEO PLAYER, WHICH IS NOT INTENDED FOR VIEWING BY THE DRIVER. THE VIDEO PLAYER IS DISABLED WHEN THE VEHICLE IS IN MOTION THROUGH A CONNECTION TO THE PARKING BRAKE. THE INSTALLER OF THIS PRODUCT MUST INSURE THE VIDEO DISABLE CONNECTION IS WORKING PROPERLY PRIOR TO DELIVERY OF THE VEHICLE.
CAR SHOW VW SERIES QUICK INSTALL GUIDE 3. Remove the airbag harness at back of dash trim. Removal of any airbag harness with the battery connected may trigger an Airbag Sensor error and will require a dealership to re-program. 1. Disconnect the vehicle's negative battery terminal. 2012 Passat used in this installation guide. Your VW vehicle may vary. 4. Remove the 4 radio mounting bolts 2. Remove the dash trim panel with a plastic pry tool. 5.
6. Run the GPS antenna to the Exterior of the vehicle, connect the harness adaptor to the vehicle's main harness, and connect the supplied antenna adaptor to the AM/FM radio antenna. 9. Insert a DVD to confirm the video disable is working properly. 7. Connect the Power, GPS antenna, radio antenna, and all desired optional harnesses. 10. Re-install all4 radio mounting bolts 8. Reconnect the airbag harness and battery then turn vehicle on to verify operation. 11.
Enabling Installer Settings Launching the Installer Menu: From any screen with the Menu Button, follow these steps t o display the Installer Setting Screen, select: 1. From any Screen, select l(Menu" 2. From the Menu Screen, select l(Settings" 3. Press l(Keypad/' Press 1(1120" and l(Enter" 4. Select or de-select desired options NOTE : If you are using the OEM BT, select "OFF" for "BT" feature, If you are using Rosen BT, turn setting to "On.
, Service and Optional Parts List Part Numbers PP-VW-MAIN CS-VW1210-12 PP-VW-LINK Description Harness, VW-Series main Installation guide, VW-Series CAN module, VW PP1005 Antenna, GPS, 5 meters PP1006 Ground plate, GPS antenna PP1007 Harness, line level pre-out w/sub PP1008 Harness, AUX in/cam in PP1009 Harness, AUX out PP1011 Harness, external BT microphone PP1012 Harness, AUX In 3.
..
~ Vl -c c 0 Q) u Q) Vl ~ :::s "'0 '+- 0 !..... ~ I L.f) 0 Q) u ~ a.. c ::J 0 +J +J c ~ _c 0 0 ~ ro ..c a_ !..... Vl Vl Q) ro c -c ...c --c0 ........ ~ z '' I V) ro V') u ~ 0:: uc <( Q)Q) u u ...
Carefully press and briefly hold STYLUS for 2 seconds on the center of the target. Repeat as the target moves around the screen.
Main Once calibration is complete you will end up in the settings menu. Press "OK" at the TS Calibrate o·p tion. Then calibrate the screen a second time. Once second calibration is complete, calibration settings will automatically be saved. This process should be done after EVERY install.
cs -, CARS HOW Congratulations on owning your new CarShow system! -, ., ~ . You can view and download complete User Manuals online at www.CarShowEiectronics.com Please visit our website for support and additional product features.
CarS how CARSHOW ELECTRONICS LIMITED WARRANTY WARRANTY VALID ONLY IN THE U.S.A.