Installation guide

Installation Guide Toyota Sienna

Installation Guide DP-TY10B4 Rev A

Page 6

Prepare the Vehicle side harnesses for

connection to the Rosen Harness

Use care not to pinch or damage cables as this will

cause performance issues/failures

CAUTION

Mount Rosen Navigation into Dash

Insert Rosen Navigation System Into Dash and re-install

radio mounting screws that were removed

Turn the vehicle ON and confirm the unit

is fully operational

With the connectors Fully Engaged, turn the vehicle on

and press the RESET for 5 seconds on the unit.

Insert a DVD to confirm the Video Disable

Circuit is properly Operating.

The Brake Wire must be connected to the Park Brake

Indicator Wire to complete a ground when the brake is

engaged.

RE-INSTALL THE TRIM COMPONENTS

You will need to reinstall all trim components

STEP

Re-Install Climate Controls

Re-install Climate Controls as well as lower climate

control trim piece that were removed in Step 2.

CAUTION