Installation guide

2. KEEPING THE DISPLAY MONITOR
To keep the LCD display back into the enclosure, pull the monitor back to the tray.
Monitor lock with a click.
3. Display Format
Press ( Menu ) to select Format
Press or button to select desire screen size.
The screen size switches in the following sequence each time the button is activated:
ZOOM ¡÷ NORMAL ¡÷ FULL
ZOOM:Picture stretched vertically and horizontally.
NORMAL:When 4:3 picture is played on a wide screen, black bands appear on
both side of the picture.
FULL: 16:9 picture is fully displayed on screen.
4. SIGNAL SOURCE ON/OFF (MODE)
To select input signal AV1 or AV2 by activation of ON/OFF (MODE) button. Using
either" " or " " key to toggle between NTSC or PAL display system.
Note: The key function will change when this monitor is connected to our range of
peripheral product. e.g. TV/Radio Tuner cum Amplifier . Please refer to the respective
manual for details.
9
5. FUNCTION MODE (MENU)
Press MENU button to activate screen set up sequence as follow:
COLOR  ¡÷ BRIGHT ¡÷ TINT  ¡÷ DIMMER  ¡÷ FORMA T
   RESET   
COLOR: Color adjustment.
BRIGHT : Brightness setting.
TINT : Adjustment to color saturation.
DIMMER: When this function is set to ON, brightness of screen will be adjusted
to be dark.