Datasheet

TECHNICAL DATA SHEET

ADAPTOR

SMP PLUG – SMA JACK

19S132-K00S3

Rosenberger Hochfrequenztechnik GmbH & Co. KG

Tel.: +49 8684 18-0

Page

P.O.Box 1260 D-84526 Tittmoning Germany Fax: +49 8684 18-499

www.rosenberger.de

email: info@rosenberger.de

1 / 2

RF_35/12.04/3.0

Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG

All dimensions are in mm; tolerances acc. ISO 2768 m-H

Interface

According to SMP side: MIL-STD-348A, Fig. 326

SMA side: IEC 60169-15; EN 122110; MIL-STD-348A, Fig. 310

Documents

N/A

Material and plating

Connector parts Material Plating

Center contact Beryllium copper Gold, min. 1.27 µm, over chemical nickel

Outer contact SMP side Stainless steel Passivated

Outer contact SMA side Stainless steel Passivated

Dielectric PTFE

PAGE 1
TECHNICAL DATA SHEET RF_35/12.04/3.0 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG ADAPTOR SMP PLUG – SMA JACK 19S132-K00S3 All dimensions are in mm; tolerances acc. ISO 2768 m-H Interface According to SMP side: SMA side: MIL-STD-348A, Fig. 326 IEC 60169-15; EN 122110; MIL-STD-348A, Fig.
PAGE 2
TECHNICAL DATA SHEET ADAPTOR SMP PLUG – SMA JACK 19S132-K00S3 Dieses Dokument ist urheberrechtlich geschützt ● This document is protected by copyright ● Rosenberger Hochfrequenztechnik GmbH & Co. KG Electrical data Impedance Frequency Return loss 50 Ω DC to 26.5 GHz ≥ 32 dB, DC to 4 GHz ≥ 22 dB, 4 to 10 GHz ≥ 15 dB, 10 to 26.5 GHz Insertion loss Insulation resistance Center contact resistance Outer contact resistance Test voltage Working voltage Contact Current ≤ 0.05 x f(GHz) dB ≥ 5 GΩ ≤ 6.