User manual Refrigerator RJKL3751
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 4 5 5 6 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7 What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10 En
squashed or damaged power plug may overheat and cause a fire. 3. Make sure that you can come to the mains plug of the appliance. 4. Do not pull the mains cable. 5. If the power plug socket is loose, do not insert the power plug. There is a risk of electric shock or fire. 6. You must not operate the appliance without the lamp cover1) of interior lighting. • This appliance is heavy. Care should be taken when moving it.
Control panel cator. It is possible to modify the setting temperature only with flashed indicator. • To set a warmer temperature, press Temperature regulator +. • To set a colder temperature, press Temperature regulator -. The Temperature indicator displays the newly selected temperature for a few seconds and then shows again the inside compartment temperature. The newly selected-temperature must be reached after 24 hours.
Door open alarm If the door remains open for a few minutes, the Alarm light will flash and an alarm will sound. 1. Press the Alarm button to switch off the Alarm sound. 2. Close the door and the Alarm light will switch off. First use Cleaning the interior Before using the appliance for the first time, wash the interior and all internal accessories with lukewarm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry thoroughly.
All parts inside the drawer can be removed for cleaning purposes. Bottle rack Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at different heights. Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required. Important! Do not move the lower door shelf to ensure correct air circulation. Place the bottles (with the opening facing front) in the pre-positioned shelf.
Hints for temperature inside the fridge A suitable temperature inside the fridge is approx. +5° C. If the temperature regulator is set to a too cold temperature, food with a high water content may start to freeze if it has been placed in the coldest places in the fridge. The picture shows the coldest and warmest places inside the fridge.
• disconnect the appliance from electricity supply • remove all food • defrost 4)and clean the appliance and all accessories • leave the door/doors ajar to prevent unpleasant smells. If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure.
Problem Possible cause Solution The food temperature is too high. Let the food temperature decrease to room temperature before storage. The room temperature is too high. Decrease the room temperature. Water flows on the rear plate During the automatic defrosting process, frost defrosts on the rear of the refrigerator. plate. This is correct. Water flows inside the refrig- The water outlet is clogged. erator. Clean the water outlet. Food prevent that water flows into the water collector.
Problem Possible cause Solution Door interferes with ventilation grill. The appliance is not levelled. Refer to "Levelling". Misaligned door. The appliance is not levelled. Refer to "Levelling". As much as the advice does not lead to result, call the nearest brand-mark service. Replacing the lamp Closing the door 1. Disconnect the appliance from the power socket. 2. Press the spring and at the same time pull the cover downwards. 3.
Location To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 40 mm . Ideally, however, the appliance should not be positioned below overhanging wall units. If the cabinet is placed in a corner and the side with the hinges facing the wall, the distance between the wall and the cabinet must be at least 10 mm to allow the door to open enough so that the equipment can be removed.
• Lay down the appliance back side down on a wooden support. • Unscrew the lower hinge (a1). • Remove the door closer device from the hinge and move the pin to the other side. Re-screw the door closer device provided within the accessory bag. • Unscrew and move the pedal to the other side (a3). • Unscrew and move the pin to the other side. • Re-insert the door. • Re-screw the lower hinge. • Raise the appliance and install the ventilation grille. • Unscrew the handle.
www.electrolux.
