User manual

• Unscrew the lower hinge (a1).
• Remove the door closure device from the hinge and
move the pin to the other side. Re-screw the door
closure device provided within the accessory bag.
• Unscrew and move the pedal to the other side (a3).
• Remove the door closure device on the door (b1).
• Unscrew and move the bracket (b2) to the other side.
• Re-screw the door closure device provided within the
accessory bag to the other side (b3).
• Remove the door.
• Unscrew and move the
pin to the other side.
• Re-insert the door.
• Re-screw the lower
hinge.
• Raise the appliance and
install the ventilation
grille.
a3
a2
a1
b2
b1
b3
• Unscrew the handle. On
the opposite side re-
move the hole covers by
driving a 3-4 mm drift or
drill into them. Install the
handle.
Install the hole covers
provided within the ac-
cessory bag.
• Put the cabinet in position.
Warning! Reposition, level the appliance, wait for
at least four hours and then connect it to the
power socket.
Do a final check to make sure that:
• All screws are tightened.
• The edges of the doors run parallel to the side edge
of the appliance.
• The magnetic seal adheres to the cabinet.
• The door opens and closes correctly.
Warning! If the ambient temperature is cold (i.e.
in Winter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fitting of the
gasket.
Environmental concerns
Recycle the materials with the symbol . Put the
packaging in applicable containers to recycle it.
Help protect the environment and human health and to
recycle waste of electrical and electronic appliances. Do
not dispose appliances marked with the symbol with
the household waste. Return the product to your local
recycling facility or contact your municipal office.
10