User's Manual

Wireless 11ac Dual Band USB Adapter AC1200UBE User Manual
12
7. The network adapter will attempt to
connect to access point now, this
may require few seconds to
minutes, please be patient. When
the “Status” become “Associated”
in “General” tab, your computer is
connected to access point you
selected. Click “Close” to close
configuration menu.
NOTE: If you insert the USB wireless
network adapter into an USB 3.0 port
and connect to an 11ac AP, device
driver will perform an auto USB mode
switch and shown the message as
below photo, or you will heard sounds
of USB insert or unplug, this is the
normal states.
2.2.2 Using Windows Zero Configuration
Windows XP and Vista has a built-in wireless network configuration utility, called as “Windows
Zero Configuration” (WZC). You can also use WZC to configure your wireless network
parameter:
1. Right-click Realtek configuration utility icon, and click “Open Config Utility”.
2. Check “Windows Zero Config” box.