User's Manual

Wireless 11ac Dual Band USB Adapter AC1200UBE User Manual
20
select the length of the key.
The passphrase must be identical with the setting of wireless access
point you with to connect.
Key index
Select WEP key index. For most of access points you can select “1”,
but please refer to the setting of the access point.
Network key / Confirm
network key
When the encryption type is “WPA” or “WPA2-PSK”, it’s required to
input a set of “passphrase” to connect to wireless access point.
Please input the same passphrase in two boxes for confirmation.
EAP TYPE / Tunnel /
Provision Mode
When authentication type is any of 802.1X, you have to select EAP
type, tunnel, and provision mode from dropdown menu. This setting
must be identical with your 802.1x authentication server.
Username / Identity /
Domain / Password
Please input 802.1x related authentication information here.
Certificate
If certification is required to authenticate with 802.1x authentication
server, please select a local certificate from dropdown list.
PAC
Check this box and PAC (Privilege Access Certificate) will be
automatically selected.
When all required parameters are set, click “OK” to create and save a new profile.
2.3.2 Remove an existing profile
When you no longer need an existing profile, you can remove it.
If you want to remove a profile, click “Profile” menu, then select an existing profile which you
wish to remove, and then click “Remove” button.