User's Manual

Wireless 11ac Dual Band USB Adapter AC1200UBE User Manual
44
4. The access point you wish to connect only allows network
cards with specific MAC address to establish connection.
Please go to “About” tab and write the value of
“Phy_Addess” down, then present this value to the owner
of access point so he / she can add the MAC address of
your network card to his / her access point’s list.
The network is slow / having
problem when transferring
large files
1. Move closer to the place where access point is located.
2. Enable “Wireless Protection” in “Advanced” tab.
3. Try a lower TX Rate in “Advanced” tab.
4. Disable “Tx Burst” in “Advanced” tab.
5. Enable “WMM” in “QoS” tab if you need to use multimedia /
telephony related applications.
6. Disable “WMM – Power Save Enable” in “QoS” tab.
7. There could be too much people using the same radio
channel. Ask the owner of the access point to change the
channel number.
Please try one or more solutions listed above.