SRM-01 Product Diagram Front I/O Diagram Accessory Kit Open the Unit 4 Install the Power Supply 4 Install the Motherboard 5 Install the Add-in Card 6 Install an External 5.25” Device 7 Install a 3.5”/2.
SRM-01 Product Diagram Panel R 80 mm Rear Fan Panel L Front Panel Bottom Dust Filter Front I/O Pinout
SRM-01 Front I/O Diagram Power Button USB 3.0 USB 2.0 HD Audio In / out Reset Button Accessory Kit Figure Part’s Name Qty Function M/B Standoff 6 Motherboard Screw-A 4 Power Supply Screw-B 10 Motherboard 5.25” Device Screw-C 8 3.5”/2.
SRM-01 Open the Unit 1-1. Untwist the thumbscrews and slide out panels R and L (Figure 1). 1 Install the Power Supply 2-1. Secure the power supply unit on the top of the case with Screw-A (Figure 2).
SRM-01 Install the Motherboard 3-1. Unscrew to release the HDD panel (Figure 3a). 3a 3-2. Line up the standoffs with the screw holes on the motherboard (Figure 3b).
SRM-01 3-3. Screw the motherboard down with Screw-B (Figure 3c). 3c 4. Install the Add-in Card 4-1. Unscrew to release the HDD panel (Figure 4a).
SRM-01 4-2. Install the add-in card and secure with the screws (Figure 4b). 4b 5. Install an External 5.25” Device 5-1. Pull the front panel out and remove it (Figure 5a).
SRM-01 5-2. Insert the 5.25” drive and secure with screws (Figure 5b). 5b 5-3. Install the front panel back onto the case (Figure 5c).
SRM-01 6. Install a 3.5” or 2.5” Drive 6-1. Unscrew to release the HDD panel (Figure 6a). 6a 6-2. Secure a 3.5” HDD/2.5” SSD onto the panel and with screws, and then screw the panel back on (Figure 6b).
SRM-01 7. Care To prevent damage, it is recommended that all panels remain closed and secured. 7-1. Slide the side panels back into place and secure with thumbscrews (Figure 7a) 7a 7-2. Clean the dust filter regularly to ensure adequate airflow and to prevent overheating and damage (Figure 7b).
SRM-01 8. Options 8-1. Additional Fan Install The SRM-01 has the capacity for additional fans. Please refer to the Specification Table on page 9 for options.
Stryker M 9. Specification Table Model Model Name SRM-01 Item Number 11-147-248 Specs Type Mini Tower Color Black Case Material Steel/Plastic Power Supply Mounted Top Motherboard Compatibility Micro ATX, Mini ITX With Side Panel Window No Expansion External 5.25" Drive Bays 1 External 3.5" Drive Bays 0 Internal 3.5" Drive Bays 2 (0) Internal 2.5" Drive Bays 0 (2) Expansion Slots 4 Front Ports Front Ports 1 x USB 3.0 2 x USB 2.
