Wireless N Dual Band Adapter RNX-N600UBE User Manual
Wireless N Dual Band Adapter RNX-N600UBE User Manual FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation.
Wireless N Dual Band Adapter RNX-N600UBE User Manual Table of Content Chapter 1 Overview..................................................................................................4 1.1 Package Content........................................................................................4 1.2 Overview of the Product .............................................................................4 1.3 Features ........................................................................................
Wireless N Dual Band Adapter RNX-N600UBE User Manual Chapter 1 Overview Thank you for choosing Rosewill’s 802.11n Wireless Dual Band USB adapter – RNX-N600UBE. This chapter is to introduce you more about this Wireless Adapter. 1.1 Package Content Before getting started, please verify that your package includes the following items: 1. Rosewill RNX-N600UBE 802.11n Wireless Dual Band USB Adapter x 1 2. Quick Installation Guide x 1 3. USB Cable x1 4.
Wireless N Dual Band Adapter RNX-N600UBE User Manual z Supports One-Click button WPS (WiFi Protected Setup) connection. z Supports MIMO Power Saving which reduce power under idle time 1.4 Product Specification Chipset Standard Modulation Type Bus Type Frequency Band Ralink RT3572 IEEE 802.11a/b/g/n OFDM/CCK/16-QAM/64-QAM USB Interface (Mini 5pin) 2.4GHz / 5GHz DUAL 11n: 300/150/108/81/54/27 Mbps 11b: 1,2,5.5,11 Mbps 11g: 6,9,12,24,36,48,54 Mbps, 135/121.5/108/81/54/40.5/27/13.
Wireless N Dual Band Adapter RNX-N600UBE 1.5 User Manual System Requirement You must have at least the following z A laptop computer/desktop PC with an available USB port z At least a 300MHz processor and 32MB of memory z Windows OS for Win98SE, ME, 2000, XP, Vista, 7 or Mac OS X 10.4~10.6 z A CD-ROM Drive z USB controller properly installed and working in the computer z A 802.11n、802.11g or 802.11a/b Wireless (and Dual Band) Access Point/Router (for infrastructure Mode) or another 802.
Wireless N Dual Band Adapter RNX-N600UBE User Manual Chapter 2 Installation Guide 2.1 z Hardware Installation Please first connect the RNX-N600UBE with the USB cable, then insert into your PC or NB USB slot.
Wireless N Dual Band Adapter RNX-N600UBE 2.2 User Manual Installing Drivers and/or Utility : Please insert the CD into your CD-rom drive Click on the “Driver Installation” option when the Smart Wizard page popup.
Wireless N Dual Band Adapter RNX-N600UBE User Manual If the program didn’t run automatically, please select Browse CD, and then double click on the Setup.exe in the CD to start the process.
Wireless N Dual Band Adapter RNX-N600UBE User Manual Upon Clicking Yes, you should see a “License Agreement” window popup. Please select “I accept the terms of the license agreement” then click “Next>” On the next window, you will have the option of “Install driver and Ralink WLAN Utility” or “Install Driver only” Win7 users are recommended to select “Install Driver only” Please select “Next >” after your selection to continue the installation process.
Wireless N Dual Band Adapter RNX-N600UBE User Manual When Install under Window XP, you may see this selection window, you can select among “Ralink Configuration Tool” or “Microsoft Zero Configuration Tool” Once select, please click “Next >” to continue. Please select “Install” to continue.
Wireless N Dual Band Adapter RNX-N600UBE User Manual Setup wizard will process. During the Installation process, you may see this popup on your lower right hand corner showing you the installation status.
Wireless N Dual Band Adapter RNX-N600UBE User Manual When complete, this window at the lower right hand corner will pop up, thus complete the driver installation. if you see below window popup, please select install this driver software anyway.
Wireless N Dual Band Adapter RNX-N600UBE User Manual Chapter 3 Wireless Connection Guide This chapter describes how to configure your Adapter for wireless connectivity on your Wireless Local Area Network (WLAN) and use the data security encryption features. After Installing the Adapter, the Adapter’s tray icon will appear in your system tray. It appears at the bottom of the screen, and shows the signal strength using color and the received signal strength indication (RSSI).
Wireless N Dual Band Adapter RNX-N600UBE User Manual button. 3.2 Connecting with Window 7 You can easily access to wireless with Win7. First, move your mouse to lower right hand corner as below and click on the icon where arrow pointing to. Click Refresh to get an update of your Wireless Network Connection. This should help you search the SSID of the network you want to connect to.
Wireless N Dual Band Adapter RNX-N600UBE User Manual Select your desired SSID, then Click “Connect”. You will be prompt to ask you entering the network security key. Once entered, please click OK to complete.
Wireless N Dual Band Adapter RNX-N600UBE User Manual You should see below in a very short period and find out whether you are connected or now. If this is your first time connect, you will see a window show up and ask you for setting up Network Location. Please select the location based on your internet useage. 3.3 Connecting with Ralink Wireless Utility We also provide a Ralink Wireless Utility for users to connect to a wireless network easily.
Wireless N Dual Band Adapter RNX-N600UBE User Manual This is the startup window of the Ralink Wireless Utility Here is each button’s function: Wi-Fi Direct (will appear only if your computer can support this function) Site Survey Link Information Profile Advanced About Please first start by selecting to search nearby wireless signal for connection. When first click on , a window will popup and presents to you the nearby Wi-Fi Signals. One time connect: Please first highlight your desired .
Wireless N Dual Band Adapter RNX-N600UBE User Manual Chapter 4 Ralink Utility Configuration 4.1 Station Mode Station Mode is the default access mode for RNX-N600UBE. RNX-N600UBE serves as a client to receive the wireless signal for connecting to the internet. You can find this icon at the system tray and double click to start it on the lower right hand corner of your computer desktop. Or you can right click the tray icon and select Launch Config Utility. Once launched, you should see this window popup.
Wireless N Dual Band Adapter RNX-N600UBE Click on Site Survey button User Manual from menu bar, the information window will pop out. Rescan: to update and refresh surrounding wireless networks Profile: to jump to profile list window Connect: select one wireless network and click this button to connect it 4.1.1.1 Connect Once you highlighted the desired SSID, then click 20 .
Wireless N Dual Band Adapter RNX-N600UBE User Manual You should see a “Profile Settings” window show up and Utility will automatically detect your SSID’s “Authentication” and “Encryption “setting. So unless you want to adjust the setting manually, otherwise, you can just click for next step. You will be asking to enter the WPA Preshared Key (or any type of the Key based on your Authentication and Encryption type.
Wireless N Dual Band Adapter RNX-N600UBE User Manual 4.1.2 Profile Profile can records your favorite wireless setting among your home, office, and other public hotspot. You can save multiple profiles and activate anyone from the record at your preference. Click Profile button from menu bar, below window will pop out.
Wireless N Dual Band Adapter RNX-N600UBE User Manual Import: import the dedicated profile Export: save the selected profile as backup Add WPS Profile: to configure WPS settings Activate: to make an existing profile become active and to connect 4.1.2.1 Add / Edit Profile . Profile Name: Enter a name for the profile edited. SSID: The name of your wireless network. Network Type: a. Infrastructure – A wireless Router and/or Access Point is required. b.
Wireless N Dual Band Adapter RNX-N600UBE User Manual Authentication: Open, Shared, WPA, WPA-PSK, WPA2, WPA2-PSK, 802.1x, CCKM, WAPI-PSK, WAPI-CA Encryption: None, WEP, TKIP, AES, SMS4 4.1.2.2 Add WPS Profile Add WPS Profile supports the configuration setup using PIN/numeric code (PIN) configuration method or Push-Button Configuration (PBC) configuration method. WPS (Wi-Fi Protected Setup) simplify the security setup and management of Wi-Fi networks.
Wireless N Dual Band Adapter RNX-N600UBE 2. User Manual Select Config mode for connecting the WPS wireless network. Enrollee: As a client device. Click Renew button to update pin code. Registrar: As a host AP. Enter 8 digit numbers Pin code and click WPS Profile button for detail configuration. 3.
Wireless N Dual Band Adapter RNX-N600UBE Click User Manual Link Information button from menu bar, below window will pop out. Link Status Throughput Statistics Statistics displays the detail counter information.
Wireless N Dual Band Adapter RNX-N600UBE User Manual 4.1.4 Advanced Click Advanced button for bringing out the Advanced function window. You will be able to adjust the wireless Mode by 2.4 GHz and/or 5 GHz and also manage the certification for some Authorization required. Advanced RNX-N600UBE is a dual band wireless adapter; therefore, you can select among 3 options on 2.4GHz, 2.4GHz + 5 GHz, or 5 GHz.
Wireless N Dual Band Adapter RNX-N600UBE User Manual Certification Management 4.1.5 About The About window tells you the details of the Firmware information.
Wireless N Dual Band Adapter RNX-N600UBE User Manual 4.2 AP Mode RNX_N600UBE can also serve as an access point to transmit wireless signals and create wireless network, allowing other wireless clients to access the network. 4.2.1 Window 7 Right-click the tray icon Enter a name of SSID for Soft AP and 8~63 ASCII characters for WPA2 and select switch to STA+AP Mode. Pre-Shared Key.
Wireless N Dual Band Adapter RNX-N600UBE User Manual Note: ASCII characters include any numbers/letters and characters. RNX-N600UBE will automatically create a virtual adapter in your computer. AP button will be added to menu bar of main window. 4.2.1.
Wireless N Dual Band Adapter RNX-N600UBE Click AP button User Manual from menu bar, below window will pop out. AP Configuration In AP Configuration page, you can make some basic configurations, such as wireless network name, and security setting. MAC Table MAC Table page shows the information of the wireless devices accessed to this soft AP. 4.2.1.
Wireless N Dual Band Adapter RNX-N600UBE User Manual 4.2.2 Windows 2000 / XP / Vista Right-click the tray icon and select switch to AP Mode. When main window pop out, select button from the menu bar for more settings. 4.2.2.
Wireless N Dual Band Adapter RNX-N600UBE Click User Manual Config AP button from the above window, a setup window will popup. SSID: Enter a name of SSID for Soft AP. Channel: Select the channel used for wireless communication from drop-down menu. Available channel numbers are 1 to 11 for USA, 1 to 13 for European countries.
Wireless N Dual Band Adapter RNX-N600UBE User Manual 4.2.2.2 Advanced Click Advanced button from menu bar, below window will pop out. Beacon Interval: Set the beacon interval of wireless radio. Do not modify default value if you don’t know what it is, default value is 100. TX Power: You can set the output power of wireless radio. Unless you’re using RNX-N600UBE in a really big area, you may not have to set output power to 100%.
Wireless N Dual Band Adapter RNX-N600UBE User Manual be able to reach your RNX-N600UBE). 4.2.2.3 Access Control List Access control includes Allow All and Reject All. After editing the MAC address access list, only the MAC in the Allow All list could access the Soft AP. Click Access Control List button from menu bar, below window will pop out. 4.2.2.4 Associate List Associate List page shows the information of the wireless devices accessed to this soft AP.
Wireless N Dual Band Adapter RNX-N600UBE Click User Manual Associate List button from menu bar, below window will pop out.
Wireless N Dual Band Adapter RNX-N600UBE User Manual FAQ This chapter provides solutions to problems that may occur during the installation and operation of the Wireless Dual Band USB Adapter. Read the descriptions below to solve your problems. 1. The Wireless Dual Band USB Adapter does not work properly. Reinsert the Wireless Dual Band USB Adapter into your PC’s USB slot. Right click My Computer and select Properties. Select the device manager and click on the Network Adapter.
Wireless N Dual Band Adapter RNX-N600UBE User Manual there may be a problem with the broadband connection. Check that the LED indicators on the wireless router are functioning properly. If not, check that the AC power and Ethernet cables are firmly connected. Check that the IP address, subnet mask, gateway, and DNS settings are correctly entered for the network. In Infrastructure mode, make sure the same Service Set Identifier (SSID) is specified on the settings for the wireless clients and access points.
Wireless N Dual Band Adapter RNX-N600UBE User Manual located. 5. Nothing happens when I click ‘Open Config Utility’ 1. Please make sure the wireless network card is inserted into your computer’s USB port. 2. Reboot the computer and try again. 3. Remove the card and insert it into another USB port. 4. Remove the driver and re-install. 5. Contact the dealer of purchase for help. 6. I can not establish connection with a certain wireless access point 1. Click ‘Add to Profile’ for few more times. 2.
