0/100/1000Mpbs PCIe LAN Card RC-401-Dual-EX User Manual Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.com for complete warranty information and future support for your product.
10/100/1000Mpbs PCIe LAN Card RC-401-Dual-EX User Manual 1. Introduction This PCI Express Host Adapter can upgrade your desktop or Notebook computer to have Two RJ-45 Port and support Gigabit Ethernet 10Mbps (half-duplex), Ethernet 20Mbps (full-duplex), Fast Ethernet 100Mbps (half-duplex), Fast Ethernet 200Mbps (full-duplex), Gigabit 1000Mbps (full-duplex) and Gigabit 2000Mbps (full-duplex) transfer rate It comes with drivers for Windows. 1.1. Features • RSS Hash Calculation and QoS (IEEE 802.
10/100/1000Mpbs PCIe LAN Card RC-401-Dual-EX User Manual 2.1. Windows Driver installation This Driver support Windows 2000, Windows XP 32bit/64bit, Windows Server 2003 32bit/64bit. On plug & play Windows versions, the adapter is found, identified, and configured automatically. Cancel all operating system attempts to install the driver automatically. NOTE: To install the driver, you have to be logged in as a user with administrative rights. To install the driver, proceed as follows: 1.
10/100/1000Mpbs PCIe LAN Card RC-401-Dual-EX User Manual Marvell CPA installation The Marvell CPA software is the tool to management your Network Adapter. This software support Windows 2000, Windows XP 32bit/64bit, Windows Server 2003 32bit/64bit. To install this software, proceed as follows: 1. Make sure Driver CD is in your ODD drive, and locate the driver in the following location. (X:\ means your ODD drive) For 32-bit OS X:\1000_GigaNet\Marvell_Yukon\Windows\NetworkUtility(CPA)\x86\SetupCPAwin_v5.64.
10/100/1000Mpbs PCIe LAN Card RC-401-Dual-EX User Manual and execute the setup file "setupCPAwin.exe" 2. Follow the instructions displayed during the installation procedure. 2.4. Verifying The installation To verifying the instructions, you need to follow the instructions in this section. 1. Right click on “My Computer” icon, select ”Properties”, left click on ”Hardware” tab, and then on ”Device Manager” button. 2.
o ro l P a n e l( C l sa si c V i e w ) N e tw o rk C o n tr o l 10/100/1000Mpbs PCIe LAN Card RC-401-Dual-EX User Manual Please see the “2.4 CPA user’s Guide” for more detail information for CPA using. CPA user’s Guide Marvell CPA utility helps to perform the following tasks: z Configuration of the adapters and their corresponding ports. z Monitoring of the status of the adapters installed z Establishment of VLANs z Building of teams / Enabling of link aggregation according to IEEE 802.
10/100/1000Mpbs PCIe LAN Card RC-401-Dual-EX User Manual Click “Marvell Network Control” Various tabs contain trees showing the currently installed adapters and their configuration: z The “Adapter” table displays the network adapters available in your system with their corresponding ports. It shows the ports, which have been configured as VLANs, for RLMT and those, which have been aggregated into a team. This tab only serves as an overview. For configuration, select one of the other tabs.
10/100/1000Mpbs PCIe LAN Card RC-401-Dual-EX User Manual Virtual LAN (VLAN) Support Avirtual LAN is a group of network devices that belong to the same network segment, regardless of the physical network structure. A logical network structure based on business requirements is possible. With virtual networks, physical location no longer specifies the network auser is assigned to: user clinetswith similar networking requirements can be united in one network griop, or VLAN.
