R-BC-01 User manual 1 2 6 3 7 4 8 ALK Ni-Cd 9 5 Ni-MH 10 DC SOCKET LED LIGHT (9V BATTERY) CHARGING (9V BATTERY) +POLE BATTERY SELECTION SWITCH 1 -POLE BATTERY CHARGER BAY POWER LIGHT LED INDICATORS LCD DISPLAY
LCD & LED Display Battery TYPE Ni-Cd LCD capacity Indication Blinking downward Function LED Indication LCD display word Discharge Yellow DIS Charging Red CHA Flashing upward Fully charged Green OK Fully charged Charging Red CHA Flashing upward Fully charged Green OK Fully charged Charging Red CHA Flashing upward Fully charged Green OK Fully charged Ni-MH Alkaline 2
Ni-Cd Battery voltage Ni-MH is very low short Alkaline Battery can’t recharge Off BAD Dear Customer, Thank you for purchasing the ROSEWILL universal battery charger. This product is an excellent environmentally friendly choice providing a comprehensive and versatile solution to keeping your batteries charged when you need them and minimizing battery waste. The device you have purchased is equipped with the best available technology.
With both LED and LCD display ,the status of each batteries charge cycle can be seen easily With individual maximum timer control for overcharge protection. Charges Ni-Cd (Nickel Cadium), Ni-Mh(Nickel Metal Hydride), Alkaline *, RAM(Rechargeable Alkaline Manganese) Note on standard alkaline batteries: The ROSEWILL Charger can charge most types of alkaline batteries. Please use the setting “ALK” on the sliding front panel of your charger.
Mono (C), Baby (D), Mignon (AA) and Micro (AAA) as well as 9v block batteries. The charger is also effective at recharging standard alkaline batteries of the same types but at a more limited capacity as outline earlier. (See “note on standard alkaline batteries”) Warranty Disclaimer No part of the product may be modified or rebuilt and the housing must not be opened. Always observe the safety instruction.
Important safety instruction Before you use your new universal fast charger, please pay attention to the user’s manual and the safety instructions listed below. Never use the unit outdoors; it is designed only for use indoor use This charger is only suitable for the Ni-Cd(Nickel Cadmium) accumulators and the Ni-MH(Nickel Metal Hydride ) accumulators and Alkaline Don’t use extension cord for connection of the unit. Pay attention to the correct polarity during inserting the accumulators.
- AAA accumulators with a capacity of 300 mAh can never be charged for more than 0.5 hours. Never connect other electric units or devices with a damaged main together. If the connection cord of this unit is damaged, it must be replaced by the manufacturer, its service person or a similar qualified person, in order to avoid danger. PRODUCT DESCRIPTION 1、This charger can charge 4 kinds of batteries Ni-Cd、Ni-MH, RAM &Alkaline.
3、Operation Please read the following instructions carefully before first use of the ROSEWILL Charger. Connect the DC plug from the AC adaptor to the DC socket on the rear of the charger. Insert the AC adaptor into the household supply ensuring the wall socket is switched ON. This will cause the LED power indicator light to turn on.
LCD & LED will have the same display as for charging Ni-Cd battery. Providing the fully charged batteries are not removed form the battery charging bays, The ROSEWILL Charger will automatically trickle charge the battery keeping it at its optimum capacity. CHARGING TIME In order to determine the approximate charge times the formula as below can be applied. capacity of the battery x 1.
C D 9V block 1.5V <1.4V 6Hours 1.5V <1.4V 10Hours 200mAh 7 Hours Warranty Information This product is fully guaranteed to the original purchaser against defects and workmanship for a period of one (1) year from the date of purchase, providing the equipment has been operated according to the accompanying instructions. This warranty is not valid if the product has been misused or damaged in way that is beyond our control.
