Service manual

R910E Service Manual
9
The descriptions for function control LEDS
1.
Contrast Adjust the picture contrast.
2.
Brightness Adjust the picture brightness.
3. Input Selected Input Signal source selected (select Analog or Digital input source)
4. Focus Adjust picture Focus (available in Analog mode only).
5.
Clock Adjust picture Clock (available in Analog mode only).
6.
H- Position Adjust the horizontal position of the picture (available in Analog mode only).
7. V- Position Adjust the vertical position of the picture (available in Analog mode only).
8. Language Multi-Language selection
9. Scaling Mode
Stretch the picture to fit full screen, screen size ratio or native size (this function
only works when the resolution setting is lower than the native resolution of
1280x1024).
10.
Red Adjusts Red intensity.
11.
Green Adjusts Green intensity.
12.
Blue Adjusts Blue intensity.
13.
C1
(6500K) Color
The color temperature for 6500°K is x=0.313, y=0.329.
14.
C2
(7800K) Color
The color temperature for 7800°K is x=0.296, y=0.311.
15.
Reset
Clear old settings of Auto-configuration, re-activates auto-configuration and set
the color temperature to 7800°K.
16.
Exit Save user adjustment and exit OSD menu.