- Rosewil USB 2.0 2-Port PCI Adapter User Manual RC100

6
User Manual
USB 2.0 2-Port PCI Adapter RC100
2. After you have rebooted, Please insert the Driver CD into the CD-ROM drive of your computer.
Browse to the VIA USB 2.0 Driver Folder “\PCI_IO\Viausb20” on the Driver CD, then double-click
the installation file “Setup.exe”. Follow the on-screen instructions, then reboot when prompted.
This will automatically install the driver for the “PCI Universal Serial Bus” device found in step 1.
3. Once you have rebooted, your USB 2.0 Four Port PCI Card is ready for operation. Open Device
Manager, you will see the newly installed devices.
Windows® 2000 Installation
Windows® 2000 operating system natively supports this USB 2.0 Four PCI Card.
• No Drivers are necessary
However, please ensure you have the latest Service Pack installed.
• Windows® 2000 Service Pack 4 (or later)