-Port Serial PCI Adapter RC300 User Manual
1-Port Serial PCI Adapter RC300 User Manual Overview This PCI I/O card is a single RS-232 port controller with PCI bus interface and uses an all-inone solution from NetMos Technology, which provides superior performance and unmatched data transfer rates. The most advanced feature is it uses of a single interrupt, which is set automatically by the host system and share among all on-board I/O ports and supports printer interface as well as PS2, EPP & ECP modes.
1-Port Serial PCI Adapter RC300 User Manual and attempt to install driver for it. 1. 2. Start Windows 95/98/2000/XP The“Update Device driver Wizard” will appear, informing you that it has found a “PCI I/O Card”. Click the “Next” button. 3. Click “Other Location” for Windows 95 or “Specify a location” for Windows 98 to install the driver. 4. Insert the driver CD in CD-ROM drive (D) and click on the “Browse” button. 5. Windows 98/95/2000 will automatically locate the driver in the driver diskette.
1-Port Serial PCI Adapter RC300 User Manual “OK” button to continue. 6. Click on the finish button to start copying files from driver diskette. 7. Windows 98/95/2000 will automatically restart in order to update the hardware configuration. 8. Once Windows 98/95/2000 has restarted, you can now connect your external devices to the PCI I/O card. To install the driver for the external devices, please refer to the external device user’s manual. Windows NT 4.0 Make sure Windows NT 4.
1-Port Serial PCI Adapter RC300 User Manual restart in order to complete the driver installation. Installing DOS Driver Copy “NMDOSIN.EXE” to your hard disk and run “NMDOSIN.EXE” Update Drivers Please visit this website: http:/www.netmos.com/for all the latest drivers for your PCI I/O card. Thank you for purchasing Rosewill Product. Please register your product at www.rosewill.com for complete warranty information and future support for your product.
