ports Parallel PCI Adapter RC302 User Manual
1 ports Parallel PCI Adapter RC302 User Manual Overview This PCI card is a single 1284 parallel port controller with PCI bus interface and supports the existing centronics printer interface as well as PS2, EPP & ECP modes and uses an all-in-one solution from NetMos Technology, which provides superior performance and unmatched data transfer rates. The most advanced feature is it uses of a single interrupt, which is set automatically by the host system and share among all on-board I/O ports.
1 ports Parallel PCI Adapter RC302 User Manual Driver Installation Windows 95/98/2000 Once the PCI I/O card is installed and the computer is restarted, Windows will detect the board and attempt to install driver for it. 1. Start Windows 95/98/2000/XP 2. The“Update Device driver Wizard” will appear, informing you that it has found a “PCI I/O Card”. Click the “Next” button. 3. Click “Other Location” for Windows 95 or “Specify a location” for Windows 98 to install the driver. 4.
1 ports Parallel PCI Adapter RC302 5. at the “Browse” option, User Manual select “CD-ROM(D) FOLDER “PCI_I/O\NM97X5\WIN9X” “OK” button 6. The “Update Device Driver Wizard” will appear, informing you that it has found the “NetMos PCI I/O Card” driver. Click the “Next” button. . 7. Follow the instructions to finish up the drive installation. . 8.
1 ports Parallel PCI Adapter RC302 User Manual 3. Click on the Open button Step 6: Finally, click the “OK” button Step 7: Follow the instruction to finish the driver installation. Your system will automatically restart in order to complete the driver installation. Installing DOS Driver Copy “D:\PCI_IO\NM97X5\DOS\NMDOSIN.EXE ” to your hard disk and run it. Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.
