2-Serial/1-Parallel Port PCI Adapter RC303 User Manual
-Serial/1-Parallel Port PCI Adapter RC303 User Manual Overview This PCI I/O card is a dual UART with 1284 printer interface port controller with PCI bus interface and uses an all-in-one solution from NeMos Technology, which provides superior performance and unmatched data transfer rates. The most advanced feature is it uses of a single interrupt, which is set automatically by the host system and share among all on-board I/O ports and supports printer interface as well as PS2, EPP & ECP modes.
2-Serial/1-Parallel Port PCI Adapter RC303 User Manual Start Windows 95/98/2000/XP. The“Update Device driver Wizard” will appear, informing you that it has found a “PCI I/O Card”. Click the “Next” button. Click “Other Location” for Windows 95 or “Specify a location” for Windows 98 to install the driver. Insert the driver CD in CD-ROM drive (D) and click on the “Browse” button. Windows 98/95/2000 will automatically locate the driver in the driver diskette. Click the “OK” button to continue. .
2-Serial/1-Parallel Port PCI Adapter RC303 User Manual Windows 98/95/2000 will automatically restart in order to update the hardware configuration. Once Windows 98/95/2000 has restarted, you can now connect your external devices to the PCI I/O card. To install the driver for the external devices, please refer to the external device user’s manual. Windows NT 4.0 z Make sure Windows NT 4.0 is properly installed into your system first. z Start Windows NT. z Insert Windows NT 4.
