394a 3+1 Ports NEC PCI Card RC502 User Manual
1394a 3+1 Ports NEC PCI Card RC502 User Manual Overview The IEEE1394 multimedia connection (also known as Fire Wire by Apple Computer, and iLink by Sony) features hot swapping, high-speed performance, peer to peer communication and daisy chained which can accept up to 63 devices connected simultaneously. The idea of IEEE1394 standard is all other devices and peripherals that connected outside of PC can simply plug into 1394 port instead of opening case and adding a circuit board.
1394a 3+1 Ports NEC PCI Card RC502 User Manual Driver Installation Windows 98/98SE/ME Once the IEEE 1394 Adaptor is installed and the computer is restarted, Windows will detect the board and attempt to install driver for it. 1. New hardware “NEC Firewarden OHCI Computer IEEE 1394 Host Controller” found, then click “Next” to continue. 2. After Windows has found the new hardware, Select “Search for the best driver for your device (Recommended)” and click “Next” to continue. 3.
1394a 3+1 Ports NEC PCI Card RC502 User Manual 4. Windows is ready to install the driver for the device, and click “Next” to continue installation. 5. Windows has finished the driver installation and click “Finish”, then restart your computer 6. If the drivers are installed successfully, you will see the following new devices in Device Manager.
1394a 3+1 Ports NEC PCI Card RC502 User Manual Windows 2000 & Windows XP After installing the IEEE 1394 Adaptor into an available PCI slot, Windows 2000 & Windows XP will find the new device. It will then install the driver for it seamlessly. Finally, an “NEC Firewarden OHCI Compliant IEEE 1394 Host Controller” will be added to your system. Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.
