ATA-133 2 Port PCI Adaptor without RAID RC208 User Manual
ATA-133 2 Port PCI Adaptor without RAID RC208 User Manual ULTRA ATA/133 PCI Card Features and Benefits • • • • • • • • Silicon Image SiI 0680 Compliant with UltraDMA6 ATA/133 specifications Compliant with PCI v2.
ATA-133 2 Port PCI Adaptor without RAID RC208 User Manual Hardware Installation 1. Turn Off the power to your computer and any other connected peripheral devices. 2. Unplug the power cord from the back of the computer. 3. Remove your computer’s cover. 4. Remove the slot bracket from an available PCI slot. 5. To install the card, carefully align the card’s bus connector with the selected PCI slot on the motherboard. Push the board down firmly, but gently, until it is well seated. 6.
ATA-133 2 Port PCI Adaptor without RAID RC208 User Manual Driver Installation For Windows® 98 SE For New Windows® 98SE Installation 1. Install the board and follow Microsoft procedures to install Windows® 98 SE accordingly. 2. Once Windows has been installed, right click My Computer and click Properties. Select Device Manager tab. 3. Double click PCI Mass Storage Controller listed under Other Devices. 4. Select Driver tab, then click Update Driver button. 5.
ATA-133 2 Port PCI Adaptor without RAID RC208 User Manual 3. Double click PCI Mass Storage Controller listed under Other Devices. 4. Select Driver tab, then click Update Driver button. 5. Insert the driver CD into the CD-ROM Drive and click Next. 6. Select Search for the best driver for your device(Recommended) from the following dialog box and type D:\PCI_IO\Cmd0680\ide133 (Note: “D:\” represents the drive letter assigned to the CD-ROM drive you are using.
ATA-133 2 Port PCI Adaptor without RAID RC208 User Manual 1. Install the board and follow Microsoft procedures to install Windows NT 4.0 accordingly. 2. At the Windows NT Setup screen, press F6 to specify and add the driver. 3. Press S, select Other, then press Enter. 4. Insert the driver diskette and press Enter. 5. Select Silicon Image SiI 0680 ATA/133 Controller and press Enter. 6. Press Enter to continue and follow on-screen instructions to complete Windows NT 4.0 installation.
ATA-133 2 Port PCI Adaptor without RAID RC208 User Manual For Existing Windows® 2000 Installation 1. Install the board and boot up Windows® 2000. 2. At the Found New Hardware Wizard, click Next. 3. Select Search for a suitable driver for my device(recommended) and click Next. 4. Check the option Specify a location and then click Next to continue. 5.
ATA-133 2 Port PCI Adaptor without RAID RC208 User Manual 6. The Hardware Installation window pops up, click Continue Anyway, the Finish. 7. Click Next again, then Finish. 8. Restart Windows to complete driver installation. To Verify Windows® 2000/XP/Server 2003 Installation 1. Right click My Computer and click Manage. 2. Select Device Manager. 3. Double click SCSI and RAID Controller, then double click Silicon Image SiI 0680 ATA/133 Controller to display driver properties.
ATA-133 2 Port PCI Adaptor without RAID RC208 User Manual
