E-SATA 1.
E-SATA 1.5G 1+1 Port PCI Adaptor RC210 User Manual This Manual for the Models of 2 Channels SATA HBA: 1.Introtuction The Low Profile Serial ATA 2 Channels PCI Host Adapter is a PCI to dual Serial ATA host controller board which can support Low profile PCI and regular size PCI both. It provides a 32bit, 33/66 MHz PCI interface on the host side and dual, fully compliant Serial ATA ports on the device side to access SATA storage media such as hard disk drive, ZIP drive, CD-ROM, CD-RW, DVD-ROM.
E-SATA 1.5G 1+1 Port PCI Adaptor RC210 User Manual Mobile DVD and Mobile CD-RW. 1.2. Package Contents • Low Profile Serial ATA 2 Channel PCI Host Adapter • This Users Manual • Driver CD • Low Profile Size PCI Bracket ( Not supported on Model D) 2. Software Installation This section provides the information on how to install the drivers of Low Profile Serial ATA 2 Port PCI Host Adapter for the operating systems: New & Existing Windows 98/98 SE New & Existing Windows ME New & Existing Windows NT 4.
E-SATA 1.5G 1+1 Port PCI Adaptor RC210 User Manual For Existing Windows 98/98 SE Systems 1. After the Serial ATA PCI Host Adapter and attached drives are configured, boot up Windows. 2. At the Add New Hardware Wizard, click Next. 3. Select Search for the best driver for your device option and then click Next. 4. Insert the Driver CD, check Specify a location, uncheck the other boxes, and click Browse. 5. Points specify a location, example E:\SATA Non-Raid_2Port\ Sil3x12\ Win98_me _2000_xp_ nt4.
E-SATA 1.5G 1+1 Port PCI Adaptor RC210 User Manual device is working properly is displayed in the dialog box, the driver has been correctly installed. If any error message is displayed, remove Silicon Image Sil-3x12 SATALink Controller and restart your system. 2.3. Windows NT 4.0 Driver Installation For New Windows NT 4.0 System 1. Before installation, copy all the files under directory E:\SATA Non-Raid_2Port\ Sil3x12\ Win98_ me _2000_xp_nt4.0\ driver\ *.* to a blank floppy disk. 2.
E-SATA 1.5G 1+1 Port PCI Adaptor RC210 User Manual 5. Select Silicon Image Sil-3x12 SATALink Controller Driver and press Enter. 6. Press Enter to continue and follow on-screen instructions to complete installation. Add Windows 2000 Driver on Original Booting Device 1. After the SATA PCI Host Adapter and attached drives are configured, boot up Windows. 2. At the Found New Hardware Wizard, click Next. 3. Select Search for a suitable driver for my device (recommended) and click Next. 4.
E-SATA 1.5G 1+1 Port PCI Adaptor RC210 User Manual Verification of the Proper Installation for Windows 2000/XP 1. Double click My Computer/Control Panel/System. 2. Click Hardware then click Device Manager. 3. Double click SCSI and RAID Controllers, then double click Silicon Image Sil-3x12 SATALink Controller to display driver properties. 4. A message This device is working properly is displayed in the dialog box, the driver has been correctly installed.
