eSATA II 1+1 PCIe Card RC214 User Manual
eSATAII 1+1 PCIe Card RC214 User Manual Important Message for User before Installing RC-214: z New HD connecting to RC-214 must process “initial (F-disk)” and “format” before using. Otherwise, PC might find nothing in the system. z If you want to boot from correct HD connecting to either motherboard or RC-214, please change correct HD source from CMOS “booting sequence”.
eSATAII 1+1 PCIe Card RC214 User Manual 2.1. Windows NT 4.0, Windows 2000/Server 2003/XP/VISTA Fresh OS installation Follow the instructions in this section if you are performing a new installation of Windows NT 4.0, 2000/XP, Server 2003 and you wish to boot from a device attached to the SATA port. 1. Power off the system. Insert SATA Card into an available PCI slot. Connect serial ATA cable(s) between the SATA port and serial ATA device(s). Power up the system. 2.
eSATAII 1+1 PCIe Card RC214 User Manual For Windows NT 4.0 1. Double click on 'My Computer' icon, select 'Control Panel', click on 'SCSI Adapters' icon, 'Silicon Image SiI 3132 SATALink Controller' should displayed correctly under 'Device' and 'Driver' tab. 2. To view information about the devices attached to the controller, use the SiICfg Utility and click on the device from the list. For Windows 2000/XP/VISTA 1.
