User manual

User’s manual
USB3.0 Adapter for IDE / SATA Device
Adaptateur pour disque dur IDE / SATA périphérique
RCAD-11003
3
Software Installation
4
Connect the power cable to the power adapter.
Plug the power supply into the wall. Push the power button. The green LED should
light, and you should hear the drive spin up.
After the computer boots, connect the USB plug on the adapter to an available USB
port on the computer. Windows will find new hardware and install the appropriate
drivers.
Hardware installation is complete. Your drive is ready to use!
No software installation is required! Just plug it in and your drive will be detected
automatically.
To Verify Successful Installation in Windows® 2000/XP
1. Right-click My Computer, and select Properties. Click the Hardware tab, then
Device Manager.
2. You should see a category called Universal Serial Bus Controllers and a device
called USB Mass Storage Device, and a category called Disk Drives with your
drive listed as a USB Drive.
To Verify Successful Installation in Windows® Vista/Windows 7
1. Right-click My Computer, and select Properties. Click Device Manager .
2. You should see a category called Universal Serial Bus Controllers and a device
called USB Mass Storage Device, and a category called Disk Drives with your
drive listed as a USB Drive.
Step 2
Step 3
Step 4
Step 5