3.
3.2MP Web Cam RCM-3640 User Manual Table of Contents Chapter I. Introduction.....................................................................................................................2 Box Contents .................................................................................................................. 2 External Components ..................................................................................................... 2 System Requirements..........................................
.2MP Web Cam RCM-3640 User Manual Chapter I. Introduction Thanks for purchasing the USB Web Camera. This USB Web Camera will display real-time video on your PC screen, enabling you to have live video-conferences and interactive video conversations* with people over the internet. Your new USB Web Camera can also create still images for applications that produce greeting cards, photo albums and video mails. Your USB Web Camera will become a watch-dog while the security software is activated.
3.2MP Web Cam RCM-3640 User Manual ) Note: 1. The power supply for the camera is provided through the USB cable. 2. Illustrations may appear different from your USB Web Camera.
3.2MP Web Cam RCM-3640 User Manual vehicle or direct sunlight. Exposure to high temperatures may adversely affect the camera case and internal components. Do not remove the camera casing. Internal inspection, maintenance and repairs should be carried out by an authorized service facility. Do not use the camera if any foreign objects have entered the casing. Disconnect the camera from your computer and contact your local dealer or an authorized service facility. Do not continue to use the camera.
3.2MP Web Cam RCM-3640 User Manual Chapter II.
3.2MP Web Cam RCM-3640 User Manual Chapter III. Installation Get Ready To Install Your USB Web Camera 1. Your USB Web Camera 2. Web Camera SOFTWARE CD-ROM Install Your USB Web Camera 1. Turn on your computer or Notebook PC. Close all the programs run under the Windows system. 2. Connect the end of the USB cable of your PC Camera into the USB port of your computer or Notebook PC.
3.2MP Web Cam RCM-3640 User Manual 3. Load the Web Camera SOFTWARE CD-ROM into your CD-ROM drive. 4. Follow the on-screen instructions given by the installation program to complete the USB Web Camera installation. (If the auto-run program is not started, choose Start and Run, type ‘E:/Setup.exe’ at the Open column to start installation.) Your USB Web Camera is now set up and ready to use. Please refer to the next chapter Using the USB Web Camera for more information.
3.2MP Web Cam RCM-3640 User Manual Chapter IV. Using the USB Web Camera Before using the USB Web Camera, make sure it is properly connected to the USB Port and the required Setup software is installed from the Web Camera SOFTWARE CD-ROM, as described in the previous chapter. Software A variety of TWAIN compliant image editing, graphics application and video editing software can be used with the USB Web Camera to view, edit, record and send videos and pictures.
3.2MP Web Cam RCM-3640 1. 2. User Manual Download and install the software z Go to http://messenger.msn.com/. z Choose the version suitable for your system, then download and install it. Register with MSN Messenger z If you have a Hotmail or MSN e-mail address, go straight to step 2. z If you do not have a Hotmail or MSN e-mail address, you need to sign up for a Microsoft .NET Passport with your current e-mail address, or sign up for a free Hotmail account. 3.
3.2MP Web Cam RCM-3640 User Manual window like the one below to your right on your desktop. 2. Get a Yahoo! ID Every person needs a unique ID to identify himself when using Yahoo! Messenger. After you have installed the program, you will see a Get a Yahoo! ID button where you can sign up for a Yahoo! ID if you do not have any. If you have already created a Yahoo! ID for any Yahoo! Services – Mail, My! Yahoo, Yahoo! Personals, etc. – you can use that for Yahoo! Messenger as well.
3.2MP Web Cam RCM-3640 6. User Manual Chat using a live webcam 1. In the main Yahoo! Messenger window, click the Webcam button while you are exchanging messages with a contact. Your live image will be sent to your friend. 2. Follow the instructions that appear. If the video image from the viewing window is not clear, adjust the focus. If you cannot see an image on your computer screen, consult the Troubleshooting section at the end of this manual.
3.2MP Web Cam RCM-3640 User Manual Items in the above Video Format window are described as follows: • Output Size – this setting controls the size of the image or video that will be shown by the software. Larger images contain more data, so the frame rate might be slower than for smaller resolutions. • Color Depth/Compression – this setting controls how many colors will be shown. The higher the number, the more colors that can be shown.
3.2MP Web Cam RCM-3640 User Manual Items in the above Video Source windows are described as follows: • Saturation – this setting controls the richness of colors shown by the camera. • Brightness – this setting controls how bright an image or video will appear. • Contrast – this setting adjusts the tonal range of an image by lowering mid-tone values and increasing values for high and low tones.
3.2MP Web Cam RCM-3640 User Manual Proper room lighting is critical for correct functioning of the USB Web Camera. Your camera requires a certain light level to produce good pictures. If you are getting dull or dark images, or if the color is poor, try increasing the ambient light in the room or close the light beyond the subject, or lighting the subject directly. Using the camera in a sunlit room will also produce good results.
3.2MP Web Cam RCM-3640 User Manual 2. After selecting the video device, click ‘Volume’ of ‘Sound Recording’, adjust the ‘Volume’ till the microphone play sound well.
3.2MP Web Cam RCM-3640 User Manual Important: When running with camera software application as the first time, increase the audio volume by sliding the bar in ‘Audio Property’ page as below. In the ‘Pin Line’ box, select ‘Microphone’.
3.2MP Web Cam RCM-3640 User Manual Chapter V. Troubleshooting and Maintenance This section discusses basic problems with the USB Web Camera, frequently asked questions and provides some maintenance tips. Problems and Solutions No Image ♦ Ensure the USB cable is correctly and securely attached. ♦ Ensure that your video software has been properly installed. ♦ Make sure your lens is free from obstructions, and that it is pointing in the appropriate direction.
3.2MP Web Cam RCM-3640 A. User Manual The best way is to disable all other video capture devices and ensure the USB Web Camera is the default device. To do this: ♦ Click on the Start menu button and choose Settings, and then Control Panel. In the Windows Control Panel, double click on the “Multimedia” icon. ♦ Select the Devices tab at the top to view a list of all multimedia devices installed on your computer. ♦ Double click on the driver name.
3.2MP Web Cam RCM-3640 User Manual Appendix A: Product Specifications Image Sensor 3.2M CMOS Sensor 1/4” Sensor Size Effective Pixels Up to 2048x1536 Focus Distance 10 cm to infinity Up to 24 bits Number of Colors Frame Rate Up to 30 FPS at 640x480 Mode Up to 30 FPS at 1280x960 Mode Up to 15 FPS at 1600x1200 Mode Up to 30 FPS at 2048x1536 Mode Auto Focus Yes Auto White Balance Yes Auto Exposure Control Yes LED Indicator Yes Built-in Microphone Yes Dimensions 65x13x28.
3.2MP Web Cam RCM-3640 User Manual Appendix B: FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
