Specifications

Data Storage
Specications Features
49
IT PRODUCTS
TABLE OF CONTENTS
Controllers / Raid Cards
RC-211
Chipset: Silicon Image SiI 3132
48 bits LBA can Break Capacity-Limit to Support HDD
larger than 137GB
Supports 1-lane 2.5Gbps PCI Express
Hot-plug capability
Fully compliant with Serial ATA 1.0 specications
Supports two independent Serial ATA channels
Independent Link, Transport, and data FIFO
Independent command fetch, scatter/gather, and com-
mand execution
Model RC-211
Type SATA II Controller Card
Internal Connectors 2 x SATA II
Interface PCI Express
Transfer Rate 3.0Gbps
Raid RAID 0/1 JBOD
Operating Systems
Supported Windows 2000 / XP / 2003 Server /
Vista 32&64bit
Click here for more info about this category
RC-209-EX
Enterprise-class Throughput - With Ultra/150 Command
Queuing technology that optimizes the sequence of data
transfers to the hard drive from the host, resulting in
higher performance in enterprise applications.
Rugged - Enterprise-class mechanical platform with
high-end bearings and actuator.
Unsurpassed Reliability - 1,200,000 hours MTB
RC209-EX with Silicon 3114 can support 4 SATA chan-
nels at one time. It can work as a RAID 0/1/0+1/5 HDD
controller card or an un-RAID extension card for SATA
device (HDD or SATA optical drive)
Model RC-209-EX
Type SATA Controller Card
External Ports 2 x eSATA 1.5G
Interface PCI 2.3, 32bit, 33/66Mhz
Internal Connectors 2 x ATA 133
Transfer Rate Up to 1.5Gb/s
Raid Supports RAID0(striping), RAID1
(mirroring), RAID5(Parity RAID), RAID
0+1(mirroring+striping) and Concaten.
Operating Systems
Supported W2000,XP/2003 32/64bit,Vista 32/64bit
Chipset: VIA 6421
Bus Interface: PCI bus 32 bit
Rosewill special design of “Magic Switch”: RC212 has 2
external and 2 internal SATA ports. You can activate two
SATA ports randomly by jumper depending on you need.
Two modes for RAID (0/1/0+1) or expanding card for
ATA/ATAPI/SATA device (Un-RAID) for your needs.
SATA 1.0: * Compliant with Serial ATA 1.0 specication
* Compliant with PCI Specication Rev. 2.2
* Supports all UDMA and PIO modes
Model RC-212
Type SATA / IDE Controller Card
Interface PCI
Transfer Rate Up to 1.5GB/s
RAID SATA 150 + ATA 133 : Supports
Raid 0, 1, 0+1, JBOD, un-RAID mode
Operating Systems
Supported Windows 98SE/ ME/ NT 4.0/2000/XP/
Vista 32/64bit/Home Server/Server 2003
/ Server 2008. Plug n Play support for
Win7
RC-212
RC-215
Chipset: VIA 6421
Complinat with Serial ATA 1.0 specication.
Compatible with ATA/ATAPI-6 specications .
Compliant with PCI Specication Rev. 2.2.
Supports all UDMA and PIO modes.
Supports ACPI .
Supports the Scatter/Gather function for the DMA/UDMA
function.
Supports PCI power management V1.0 to reduce power
consumption.
Dual independent DMA channels.
Model RC-215
Type SATA / IDE Controller Card
Internal Connectors 2 x SATA 150 + 1 x ATA 133
Interface PCI
Transfer Rate Up to 1.5Gb/s
Raid RAID 0,1,0+1 JBOD
Operating Systems
Supported W2000,XP/2003 32/64bit,Vista 32/64bit
RC-216
Compliant with one-lane 2.5Gb/s PCI Express specica-
tion
Compliant with Serial ATA 1.0 specication
Supports Native Command Queue (NCQ) on SATA ports
Provides three independent channels to connect two
SATA and one PATA hard disk drive
Supports up to UDMA6 transfer mode of PATA
Supports up to 4 storage device connection
RC-216 can connect 2 SATA 3G and 2 ATA 133 HDD
max.
Model RC-216
Type SATA II Controller Card
Internal Connectors 2 x SATA II + 1 x ATA 133
Interface PCI Express
Transfer Rate Up to 3Gb/s
Raid RAID 0,1,0+1 JBOD
Operating Systems
Supported Windows 2000, Windows XP/2003
/Vista 32/64 bit