USB 2.0 To IDE Cable For 2.5"/3.5"/5.
USB 2.0 To IDE Cable For 2.5"/3.5"/5.25" Drive With Power Adapter RCW604 User Manual USB 2.0 To IDE Cable For 2.5"/3.5"/5.25" Drive With Power Adapter Feature The USB 2.0 to IDE Drive Adapter implements a bridge between one USB port and one ATA or ATAPI based mass storage device port. The USB 2.0 to IDE Drive Adapter turns any IDE drive into a convenient external drive. Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives.
USB 2.0 To IDE Cable For 2.5"/3.5"/5.25" Drive With Power Adapter RCW604 Package Contents RCW-604 X 1 User manual X 1 Power adapter X 1 Installation 1. Plug the 2.5” or 3.5” ATA/ATAPI device to RCW-604 (Please notice the direction of IDE port) SATA (only available in RCW605) 3.5" 5.25" 2.5" 2.5" HD ATAPI device 3.
USB 2.0 To IDE Cable For 2.5"/3.5"/5.25" Drive With Power Adapter RCW604 2. Connect the power adapter set. 3. Plug the 4 pin power adapter to your ATA/ATAPI device (There is no additional power needed for 2.5” HD) 4. Plug the power adapter to power source and turn on the power . (Please make sure the voltage is between 100~240V) 5. Plug the USB2.0 cable to PC and wait for PC auto-detection. Driver is needed only in old system such as Windows 98.
USB 2.0 To IDE Cable For 2.5"/3.5"/5.25" Drive With Power Adapter RCW604 User Manual Notification 1. RCW-604 can only support one ATA/ATAPI device of 2.5” or 3.5” one time. This means that if you connect a 2.5” HD to 2.5” port, 3.5” port will be no function during the operation of 2.5” HD. 2. There is no different between the jumper setting of “Master” or “Slave” on your ATA/ATAPI device working with RCW-604. 3.
