User manual

ManualsBrandsRosewill ManualsHDD/SSD enclosuresRDEE-12002

2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual

2.5” HDD/SSD Screw less

External Enclosure

RDEE-12002

User Manual

Summary of content (26 pages)

PAGE 1
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 2.
PAGE 2
.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual Contents ENGLISH ................................................................................................................... 2 FEATURES .............................................................................................................. 2 SYSTEM REQUIREMENTS ......................................................................................... 2 PACKAGE CONTENTS...........................................................
PAGE 3
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual English Features       Supports SuperSpeed USB 3.0 data rate up to 5Gb/s USB3.0, backward compatible to USB 2.0 and USB 1.1. Plug and play, no driver installation needed Supports SATA III up to 6Gbps Supports any 2.5’’ SATA hard drive or SSD with thickness up to 12.7mm LED to indicate drive power and activity System Requirements   Windows® XP/Vista/7 (32/64 bit) Available USB port Package Contents    Rosewill RDEE-12002 2.
PAGE 4
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual Hardware Installation 1. Chassis Assembly Release the latch that holds the top and bottom covers of the enclosure and slide the enclosure top cover towards to front. (See Figure A-B) Figure A Figure B 2. Hard Drive Installation Place the 2.5’’ SATA hard drive into the enclosure and then slide the hard drive connector into the SATA connector inside the enclosure, slide the top cover of the enclosure back onto the frame of the enclosure.
PAGE 5
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 2.1. Install the hard drive with thickness up to 9.
PAGE 6
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 2.2. Install the hard drive with thickness up to 12.7mm (See Figure G-J) Figure G Figure H Figure I Figure J Driver Installation No driver installation is required for Windows operating systems, as this enclosure is natively supported, so the drivers are already installed.
PAGE 7
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual Français Fonctions       Prend en charge SuperSpeed USB 3.0 avec des vitesses de transfert de jusqu'à 5Go/s USB3.0, rétrocompatible avec USB 2.0 et USB 1.1.
PAGE 8
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual Installation de l'équipement 1. Assemblage du châssis Libérez le verrou qui maintient le couvercle supérieur et inférieur du boîtier et faites glisser le couvercle supérieur du boîtier vers l'avant. (Voir schéma A-B) Schéma A Schéma B 2.
PAGE 9
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 2.1. Installez le disque dur d'une épaisseur inférieure à 9,5 mm.
PAGE 10
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 2.2. Installez le disque dur d'une épaisseur inférieure de 12,7mm. (Voir Schéma G-J) Schéma G Schéma H Schéma I Schéma J Installation du pilote Aucun pilote n'est nécessaire pour les systèmes d'exploitation Windows, car ce boîtier est originellement pris en charge, et tous les pilotes requis sont déjà installés.
PAGE 11
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual Deutsch Merkmale       Unterstützt superschnelles USB 3.0 mit Übertragungsraten bis 5 Gb/s USB 3.0, abwärtskompatibel mit USB 2.0 und USB 1.1.
PAGE 12
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual Hardware-Installation 1. Gehäuse Lösen Sie die Verriegelung, mit der die oberen und unteren Abdeckungen des Gehäuses befestigt sind, ziehen Sie die obere Abdeckung nach vorn. (Siehe Abbildungen A – B) Abbildung A Abbildung B 2. Festplatteninstallation Legen Sie eine 2,5-Zoll-SATA-Festplatte in das Gehäuse ein, schieben Sie den Anschluss der Festplatte in den SATA-Anschluss im Gehäuse.
PAGE 13
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 2.1.
PAGE 14
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 2.2. Installation einer Festplatte mit einer Stärke bis 12,7 mm (Siehe Abbildungen G – J) Abbildung G Abbildung H Abbildung I Abbildung J Treiberinstallation Unter Windows-Betriebssystemen ist keine Treiberinstallation erforderlich, da das Gehäuse nativ unterstützt wird und passende Treiber daher bereits vorinstalliert sind.
PAGE 15
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual Español Características       Soporta USB 3.0 Ultra rápido y velocidad de transferencia de datos de hasta 5Gb/s USB3.0, Retrocompatibilidad con USB 2.0 y USB 1.1.
PAGE 16
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual Instalación del hardware 1. Montaje de la carcasa Libere el cierre que sujeta las cubiertas superior e inferior de la caja, y deslice la parte superior de la caja hacia delante. (Ver Figura A-B) Figura A Figura B 2. Instalación del disco duro Coloque el disco duro SATA de 2,5’’ dentro de la caja y deslice el conector del disco duro dentro del conector SATA en el interior de la caja.
PAGE 17
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 2.1.
PAGE 18
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 2.2. Instalación de disco duro con un ancho superior a 12,7mm (Ver Figura G-J) Figura G Figura H Figura I Figura J Instalación del controlador Para los sistemas operativos Windows no se requiere instalación de controlador, ya que esta caja cuenta con soporte nativo, de modo que los controladores ya están instalados.
PAGE 19
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual Portuguese Características       Suporta velocidade de dados SuperSpeed USB 3.0 até 5 Gb/s USB3.0, retro-compatível com USB 2.0 e USB 1.1.
PAGE 20
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual Instalação do hardware 1. Montagem do chassis Liberte o trinco que fixa as tampas superior e inferior da caixa e deslize a tampa superior em direcção à parte frontal. (Ver Figura A-B) Figura A Figura B 2. Instalação do disco rígido Coloque a unidade de disco rígido SATA de 2,5’’ na caixa e encaixe o conector do disco rígido no conector SATA da caixa, volte a deslizar a tampa superior para fechar a caixa.
PAGE 21
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 2.1.
PAGE 22
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 2.2. Instalar um disco rígido com espessura até 12,7 mm (Ver Figura G-J) Figura G Figura H Figura I Figura J Instalação do controlador Não é necessário instalar qualquer controlador para sistemas Windows, pois a caixa é suportada de forma nativa, por isso os controladores já se encontram instalados.
PAGE 23
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 中文特色  支援超高速 USB 3.0, 資料傳輸率最高可達 5Gb/s  USB 3.0 向下相容 USB 2.0 及 USB 1.1  支援熱插拔,無需安裝驅動程式  支援 SATA III 6Gbps  支援 2.5 吋 SATA 硬碟或 SSD 厚度最高 12.7mm  LED 指示驅動電源及讀取系統需求  Windows® XP/Vista/7 (32/64 bit) Windows® XP/Vista/7 (32/64 bit)  可使用的 USB 插槽包裝內容  Rosewill RDEE-12002 2.5” 外接盒  使用手冊  USB 3.
PAGE 24
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 硬體安裝 1. 組合鬆開固定住外接盒上下蓋的卡榫,將上蓋依箭頭指示方向滑動 (參考 Figure A-B) Figure A Figure B 2. 硬碟安裝放置 2.
PAGE 25
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 2.1. 安裝硬碟厚度 9.
PAGE 26
2.5” HDD/SSD Screw less External Enclosure RDEE-12002 User Manual 2.2. 安裝硬碟厚度 12.