Installation Guide
54
Induction Cooktop Induction Cooktop
RHAI-16001 RHAI-16001
1. Safety Caution
2. Operating instructions
Warning :
2.1 Cooking Mode:
2.2 Timer Function:
2.3 Lock Function:
Immediately switch off the induction cooker in case of any crack on the ceramic cook-
top panel.
1. Do not place the unit in any place that is near a gas or hot environment in order to avoid
damage or malfunction.
2. To reduce risk and damage, this appliance should only be connected into an individual outlet.
The rated electrical current is not less than 16A.
3. Place the unit on a level surface. The distance between the unit and its background surrounding
must have at least a 4 inch clearance.
4. Do not immerse the appliance and electric cord in liquid or allow liquid to go into the cabinet
and as it may short/contact inner electrical components.
5. The power cord must be plugged disconnected from the outlet before cleaning.
6. Do not block the rear exhaust vent with during usage.
7. If the unit is not working, please contact with our technical support for assistance. Do not
disassemble the unit in an attempt to repair the unit yourself.
8. Be sure to use only the supplied power cord or one provided by the manufacturer.
9. It is very dangerous when metal is heated directly or indirectly.
10. Do not place any additional objects on the induction cooker other than the cooking pan/pot.
11. Do not cook with an empty pan/pot. It is very dangerous and will cause unit malfunction.
12. Always clean the unit after each use to avoid any dirt or blockage of the fan exhaust.
13. Do not touch the top plate while the unit is in use, it may be very hot!
14. Do not let children operate the unit alone. Always have adult supervision to prevent injury.
15. Users with a cardiac pacemaker, please conrm with your Doctor before operating the unit to
determine if it is safe for use.
16. Do not operate the unit on a gas stove.
17. Please do not place paper, cloth, or other articles under the bottom of the pan when heating to
avoid the danger of re.
18. Do not place the unit on the cloth or carpet to avoid blocking the rear exhaust vent.
19. Avoid damage to the top plate of the unit. If the top plate is cracked, immediately turn off the
unit, disconnect the unit from the outlet, and contact technical support for assistance.
20. Do not touch the control panel with any sharp implements.
21. Do not place any metal objects on the unit while operating.
A. Connect the power cable to an available outlet
B. After inserting the plug into the socket, a “Beep” will sound and the indicator above the [On/Off]
key will ash, indicating the appliance is connected to a power source and in standby mode.
C. Place a suitable cookware on the center of the cooking zone.
D. To begin heating, press the On/Off button to power on the unit.
E. Select your Mode, Power mode (wattage) or Temp mode (Fahrenheit). Press the Mode key to
select.
F. Press the -/+ keys to select your desired power or temperature
G. Cancel or Stop the induction heating process at any time by pressing the On/Off key.
A. Power: Press the [Mode] key until the indicator of [Power] lights up, display will show [1200]
representing that the default power is 1200W. It can be adjusted by pressing the [+] or [-] key
to set the desired power level. There are 8 power levels in total: 300W, 500W, 700W, 1000W,
1200W, 1400W, 1600W, 1800W. To cancel this mode, press [Mode] key to switch to the cooking
mode or [On/Off] key to stop the operation and place the unit in standby mode.
B. Temperature: Press the [Mode] key until the indicator of [Temp.] lights up, display will show
[425] representing that the default power is 425°F. It can be adjusted by pressing the [+] or [-] key
to set the desired power level. There are 8 power levels in total: 150°F, 200°F, 250°F, 300°F,
350°F, 400°F, 425°F, 450°F. To cancel this mode, press [Mode] key to switch modes or the [On/
Off] key and place the unit in standby mode.
You can set the cooking time when a specic cooking mode is selected. Press the [Timer] key once
to access the timer function, the [Timer] indicator on the left of the key will light up. The display will
show the default time [00:30], press [+] or [-] key to set the desired time; [+] key to set the minute
and [-] to set the hour (press and hold for 3 seconds to access quick adjustment), the time can be
adjusted from 1 minute to 2 hours and 59 minutes. After setting the desired run time, press the
[Timer] key once to confirm or wait until the display stops flashing. After the “Beep” signal, the
appliance will stop the operation and change to standby mode automatically when the end of the
timer is reached. To cancel this function, either press the [On/Off] key to return to standby mode or
press and hold the [Timer] key to resume the desired power or temperature operation.
To activate the lock press the “Lock” icon. This will lock the appliance to prevent any accidental
button presses or changes while in operation. To cancel this function, either press the [On/Off] key
to return to standby mode or press and hold the [Lock] key for 3 seconds.