User's Manual

AC1200 Wireless Dual Band USB Adapter User Guide
RNX-AC1200UB
AC1200 Wireless Dual Band USB Adapter User Guide
The SoftAP icon then will appear beside Advanced icon in the utility.
Figure 5-3
Figure 5-4
 SoftAP mode: Select to enable or disable the function.
 Internet Connecting Share (ICS): Specify a connection through which devices connected
to your AP can access the Internet.
 SSID: Enter the name for your softAP (for example, Jone) so that others can know which
AP is yours when trying to connect to it.
 Security Type: The security type here is set to be WPA2-PSK which is based on 802.11i
and uses AES (Advanced Encryption Standard) instead of TKIP. It was designed to
improve the security features of WEP. WPA2-PSK uses a passphrase or key to
authenticate your wireless connection. You needn’t make any configuration here.
 Encryption Type: The encryption type here is set to be AES.
 Security Key: Enter the Key in the field to make your AP security enabled. It is
recommended that you specify another key instead of the default key 12345678. Only by
entering the corresponding key can other computers establish a successful connection with
your AP.
 IP Address: Here displays the IP address of the SoftAP.
Having completed the above settings, click Apply; then Figure 5-4 will pop up, where you click OK
to make SoftAP mode take effect.
30