Wireless G USB Adapter RNX-G100 Wireless G PCMCIA Adapter RNX-G200 Wireless G PCI Adapter RNX-G300(E) Quick Installation Guide
RNX-G100 / RNX-G200 / RNX-G300(E) User Manual 1 . About This Guide This Quick Installation Guide only provides you some basic instructions. For more detailed information, please refer to the User Manual. Before you begin, you must have at least the following: z A notebook /desktop pc with an available 32-bit Cardbus/PCI/USB slot z At least a 300MHz processor and 32MB of memory z Cardbus/PCI/USB controller properly installed and working in the computer z An 802.11g or 802.
RNX-G100 / RNX-G200 / RNX-G300(E) z User Manual Click Install Driver & Utility on the Wireless Client Configuration Utility screen Figure 2-2 z Follow the Install Shield Wizard steps, and click Finish when done.
RNX-G100 / RNX-G200 / RNX-G300(E) User Manual 3 . Install Wireless adapter 3.1 z z Cardbus Adapter - RNX-G200 Power on your notebook, let the operating system boot up completely, and login as needed. Hold the adapter with the LOGO facing up and insert it into a Cardbus slot. Figure 3-1 z If the Found New Hardware Wizard displays, choose install the software automatically (Recommended), and click Next button. The driver will be installed automatically.
RNX-G100 / RNX-G200 / RNX-G300(E) 3.2 z z z z User Manual PCI Adapter - RNX-G300(E) Open your PC case and locate an available PCI on the motherboard. Slide the PCI Adapter into the PCI slot. Make sure that all of its pins are touching the slot’s contacts. You may have to apply a bit of pressure to slide the adapter all the way in. after the adapter is firmly in place, secure its fastening tab to your PC’s chassis with a mounting screw. Then close your PC.
RNX-G100 / RNX-G200 / RNX-G300(E) User Manual Figure 4-1 z Click the Site Survey tab then click the Refresh button to search for available wireless networks.
RNX-G100 / RNX-G200 / RNX-G300(E) User Manual Figure 4-2 z To connect to one of the networks on the list, select the wireless network, and click Associate button. Congratulations! You’ve successfully configured your wireless adapter! Please read detail user manual and trouble shooting from the driver disk. Or contact support@rosewill.com for more support. Thank you for purchasing a quality Rosewill Product. Please register your product at : www.rosewill.
