54M Wireless AP Router RNX-G400 User Manual
54M Wireless AP Router RNX-G400 User Manual Connecting the Broadband Router Prior to connecting the hardware, make sure to power off your Ethernet device, Cable/ADSL modem and Broadband Router. Then follow the steps below to connect the related devices. z Connect your computer to the LAN port. Attach one end of the Ethernet cable with RJ-45 connector to your hub, switch or a computer’s Ethernet port, and the other end to one of the LAN ports of your Broadband Router.
54M Wireless AP Router RNX-G400 User Manual 1.1 Windows 2000 Please follow the steps below to setup your computer: 1. Go to Start Æ Settings Æ Control Panel Figure 2-1 2. Double click the icon Network and Dial-up Connections 3.
54M Wireless AP Router RNX-G400 User Manual 4. Highlight Internet Protocol (TCP/IP), then press Properties button Figure 2-3 5.
4M Wireless AP Router RNX-G400 User Manual 6. Press OK to close the Local Area Connection Properties window Figure 2-5 1.2 Windows XP/2003 Please follow the steps below to setup your computer: 1. Go to Start Æ Settings Æ Control Panel 2.
54M Wireless AP Router RNX-G400 User Manual 3. Click Network Connections Figure 2-7 4.
54M Wireless AP Router RNX-G400 User Manual 5. Highlight Internet Protocol (TCP/IP), then press Properties button Figure 2-9 6.
54M Wireless AP Router RNX-G400 User Manual 7.
54M Wireless AP Router RNX-G400 2 User Manual Connection the Router After configuring the TCP/IP protocol, use the ping command to verify if the computer can communicate with the Router. To execute the ping command, open the DOS window and ping the IP address of the Broadband Router at the DOS prompt : To execute ping command, open the DOS window by clicking on Start -> Run. In the Run window, type CMD.
54M Wireless AP Router RNX-G400 User Manual 3 Accessing the Web-Based Configuration Utility z Launch the Web browser and type http://192.168.1.1 in the Address field and click Enter. z After connected to the device, you will be prompted to enter the username and password. Type “guest” in the User Name field, the default password is “guest”. Figure 4-1 4 Quick Configuration for the Router After login, the Broadband Router’s web-based management is accessible.
54M Wireless AP Router RNX-G400 User Manual PPPoE Input your PPPoE Account and Password you get from your ISP.
54M Wireless AP Router RNX-G400 z User Manual After selecting the proper WAN connection setting, click Apply to save and enable these settings with the Router. 5 Checking the Connection to the Internet To check the connection to the Internet, you can open the Web browser and go to a website. You can also go to the System Overview page of the router’s Web -based configuration utility. The WAN Interface group will display the current connection information.
54M Wireless AP Router RNX-G400 User Manual 13
