Network Router User Manual

Wireless Router RNX-GX4 User’s Manual

“OK” again in the “Local Area Connection Properties” to finish this

process.

h To set IP manually:

z Select “Use the following IP address”; then type in:

 IP address: 192.168.1.x (2<x<128; system default in IP

range 192.168.1.2~192.168.1.128)

 Subnet mask: 225.225.225.0

 Default gateway: 192.168.1.1

Select “Use the following DNS server addresses”; then type in:

 Preferred DNS server: 192.168.1.1

z click “OK” in the “Internet Protocol (TCP/IPv4) Properties”

window

z Click “OK” again in the “Local Area Connection Properties” to

finish this process.

IP address refers to a specific computer within the network. So when manually set your computers’ IP,

please remember to assign different IP address for different computer within the IP range.