User's Manual

RNX-N150NUB
N150 Wireless Nano USB Adapter
 Network Type: Select the network type. If you are connecting to a wireless Router or
access point, select Infrastructure. If you are connecting to another wireless client
such as an adapter, select ad-hoc.
 Security Type: Select the security type from the list. Four options are available:
WPA-PSK/WPA2-PSK, WPA/WPA2, WEP and None. The security type should be
the same as on your router or access point, otherwise, you will not be able to build a
successful connection.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless
connection. The key must be the exact same key entered on your wireless router or
access point.
WPA/WPA2 is designed for enterprise networks and requires a RADIUS
authentication server. Choose the Encryption Type, Authentication and Certificate
according to your network environment.
WEP is based on the IEEE 802.11 standard. It uses a key to authenticate your
wireless connection.
None stands for no security. It is recommended to enable WPA-PSK/WPA2-PSK on
your wireless router or access point before configuring your wireless adapter.

Note:
You will see Figure 4-2 if you selected the security type
WPA-PSK/WPA2-PSK
; if you selected
the security type
WPA/WPA2
(-Enterprise), Figure 4-3 will be displayed; while if you selected
the security type
WEP
, Figure 4-4 will be displayed.
 Encryption Type: From the drop-down menu, select the encryption type that is the
same as on your Router or access point.
 Security Key: Enter the passphrase exactly as it is on your wireless router or access
point. Click the Show characters box to see the passphrase, or uncheck this box to
hide it.
 Authentication: Select a type of authentication, either certificate or password.
 Certificate: If you select certificate as your Authentication, then you need to specify
your certificate from the drop-down list here.
 Start this connection automatically: Check this box to automatically connect to this
network next time.
 Save: Click Save to save your settings.
Having completed the above settings, the Profile page should look like the following figure. To
connect to a desired network, just highlight the network you would like to connect to and click
the Connect button on the bottom of the window. Then click OK in Figure 4-6 to activate the
profile.
27