User's Manual
Table Of Contents
- Package Contents
- Chapter 1 Product Overview
- Chapter 2 Installation
- Chapter 3 Connect to a Wireless Network
- Chapter 4 Management
- Chapter 5 SoftAP Mode
- Chapter 6 Uninstall Software
- Appendix A: Specifications
- Appendix B: Glossary
RNX-N150NUB
N150 Wireless Nano USB Adapter
Chapter 2 Installation
2.1 Hardware Installation
Plug the Adapter directly to the USB port on your computer.
Note:
The prompted Found New Hardware Wizard screen will pop up when the adapter is installed
correctly. Click Cancel.
2.2 Software Installation
The adapter’s Setup Wizard will guide you through the installation procedures for Windows XP,
Windows Vista, Windows 7 and Windows 8. The procedures in different systems are quite
similar, therefore here takes the procedures in Windows 8 for example.
1. Insert the Resource CD into your CD-ROM drive and then go to My Computer.
Double-click CD-ROM RNX-N150NUB_v1.0, and you will see the window as shown in
Figure 2-1. Double-click Setup.exe to start the installation.
Figure 2-1
4