User Manual

2.4GHz Wireless Lite-N PCI-E Adapter RNX-N150PCe User Manual
Figure 4-7
3. Click Add device, then you can see Figure 4-8. Select Enter the new device’s PIN
and enter the PIN value of the adapter shown in Figure 4-6, click Connect.
Figure 4-8
4. When Figure 4-5 appears, the WPS configuration is complete.
4.2.2 Enter the PIN from your AP device
1. Open the WPS Utility and you will see Figure 4-3. Click Next to continue. Then Figure
4-4 will appear. Select the third option and enter the PIN value which is labeled on the
bottom of the Router. Click Next.
40