User Manual

2.4GHz Wireless PCI-E Adapter RNX-N150PCe User Manual
26
3.2.2 PIN method
There are two ways to configure the WPS by PIN method:
1) Enter the PIN from your Router or AP device.
2) Enter a PIN into your Router or AP device.
Note: This method is only available in Windows XP and Windows Vista.
Following are the detailed configuration procedures of each way.
3.2.2.1. Enter the PIN from your Router or AP device
1. Open Wireless Utility and click WPS tab. Select Enter the PIN of my
access point or wireless Router. In the empty field beside PIN, enter the
PIN labeled on the bottom of the Router (here takes 13492564 for example).
If you have generated a new PIN code for your Router, please enter the
new one instead. Click Connect to continue.