User Manual
Table Of Contents
2.4GHz Wireless PCI-E Adapter RNX-N150PCe User Manual
40
specified length. Hexadecimal format stands for any combination of
hexadecimal digits (0-9, a-f, A-F) in the specified length.
For 64-bit encryption - You can enter 10 hexadecimal digits (any
combination of 0-9, a-f, A-F, zero key is not permitted) or 5 ASCII
characters.
For 128-bit encryption - You can enter 26 hexadecimal digits (any
combination of 0-9, a-f, A-F, zero key is not permitted) or 13 ASCII
characters.
Security Key: Enter the passphrase exactly as it is on your wireless router
or access point. Click the Show characters box to see the passphrase.
Unchecking it will hide it.
Authentication: Select a type of authentication, either certificate or
password.
Certificate: If you select certificate as your Authentication, then you
need to specify yourcertificate from the drop-down list here.
User Name: Enter the name of the enterprise network.
Password: Enter the password for the enterprise network. Click the Show
characters box to see the passphrase. Unchecking it will hide it.
Start this connection automatically: check this box to automatically
connect to this network next time.
Save: Click Save to save your settings.
Having completed the above settings, the Profile page should look like the
following figure. To connect to a desired network, just highlight the network you
would like to connect to and click the Connect button on the bottom of the
window. Then click OK ito activate the profile.